Firmware & software repositories are available click here： MAXKGO MAXKGO BMS User Manual:MAXKGO Remark: Only Support 6S-28S 12A Smart Only Charge BMS and 6S-24S 150A Smart BMS Maxkgo-BMS Privacy Policy (1)Maxkgo-BMS User Protocol (1) Package Included:  1* MKBMS 6S-24S Smart Bluetooch VESC BMS Board(With aluminum shell) 1* Bluetooth module 1* UART module 1* 1.3 inch OLED display LCD screen module 1* 12MM 3-6V key switch 1* GH1.5 single head 5P line 1* GH1.25-5P to Dupont line 1* PH2.0 single head 13P line 1* PH2.0 single head 12P line 1* PH2.0 single head 8P line Operation Notes: Please ensure the correctness of the wiring sequence, from B0-B12, B13-B24, the voltage increases from low to high in sequence. 1. This BMS is compatible with battery packs up to 24s, which is over 102V when fully charged. Electric shocks from high voltage may cause serious injury.Please pay attention to safety when using.  

Read more less

Expertly designed, the MAXKGO smart BMS 12S 60V 70A protection board is compatible with both VESC and FSESC® systems. This smart BMS provides superior protection and efficiency for Ebikes, Esk8s, Escooters, and more. With advanced features including VESC compatibility, this BMS ensures maximum performance for all your electric transportation needs. Firmware & software repositories are available click here： MAXKGO Tutorial on MAXKGO BMS settings with VESC Spec: Cell voltage operating range:2V-5V Recommended series cell:6S-12S Charge / discharge voltage:24V-52V Charge Current：≤20A Abs. Max battery voltage: 60V Minimum operating voltage: 14V Continuous charging current: 20A Over charge detect and release voltage: 2V-5V Over charge protection delay: ≥4ms Discharge current: ≤70A Max. Continuous discharge / regen current: 70A  Over discharge detect / release voltage: 0-5V Over current detect delay:≥4ms Discharge over current protection release condition: off load Short Circuit detect voltage:short circuit of external load Short Circuit detect delay: 320us Short Circuit protection release: off load Battery pack capacity and internal resistance detection: Yes Balance current: 86mA @4.2V Temp Protect: -20℃—+120℃ Working Temp Range:-20℃—+80℃ Storage Temp Range: -20℃—+100℃ Working current: ≤40mA Sleeping current: ≤100uA Size: 89 x 40 x 20.8mm Net weight: 106.5g Packing size: 140 x110 x 50 mm Package weight: 303.5g Including outer carton size: 170*120*100mm Weight with outer carton: 380g Feature: Compact layout and mini Using aluminum alloy material shell, better heat dissipation. Automotive grade design, automotive grade locking connector. Configuring and firmware upgrades over USB through the MAXKGO-BMS-TOOL and ENNOID-BMS-TOOL. Automotive grade monitoring & balancing IC with separate power supply for increased reliability Voltages measurements for load, charger & battery pack Bi-directional current monitoring SOC based on coulomb counting Humidity sensor & board temperature monitoring Charger detection circuit Integrated precharge circuit Power button, USB-C, UART, I2C & isolated CAN bus interface On board High-Efficiency 3.3V regulator powered from the main battery pack High current capacity automotive grade screw connectors for main power connections Buzzer & status LED Support:  overcharge/discharge/over current /temperature protection,and have thermal management/balance function(active balance and passive balance). Support:  almost all lithium batteries such as lithium ion battery, lithium polymer battery, lithium phosphate battery, etc. Packing list: 1* PCBA 1* HY2.0 single head 10P line 1* HY2.0 single head 13P line 2* GH1.25 single head 5P cable 1* GH1.25-5P to Dupont line 1* USB cable type-C data cable 1* 2.0MM jumper cap 1* 1.3 inch OLED display LCD screen module 1* 12MM 3-6V key switch 4* M5*8 stainless steel round head screws 4* M5 copper gasket 4* 90 degree angle terminal block T90-6/5  1* XT30 (female) Video: If you need more diagrams for different series, please contact us!

Read more less

Specifications :  Firmware: 5.2 (supporting firmware upgrade)  Continuous current: 150A; instantaneous current: 200A (values depend on the mounting and ambient temperature around the device!)  Voltage: 14V-60V ( Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )  BEC: 5V@1.5A; ERPM: 150000  Supported sensors: Sensorless Supported Modes: BLDC, FOC (sinusoidal)  Control Interface Ports: USB UART  Input Set Support: PPM, ADC, NRF, UART  Regenerative capacity: Yes Programmable: Yes   Power Wire: 8AWG 1200mm / Motor Wire: 8AWG 170mm   Size: 103.5x67.6x27.5mm(Including aluminum case)  Features:  1.Fully sealed with IP68 water-proof rate.  VESC ESC: based on vesc6, programmable via VESC_TOOL and support real-time data read.  2.6-layer 3oz special PCB plate with good heat dissipation, support rated current 150Amps. 3.Adopting CPU STM32F405 with the structure of ARM Cortex-M4 allows CPU clock speed.  4.Support three control modes: Current / Dutycycle / Speed.  5.Multiple protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection over 80 ℃.  6.Compact size with high efficiency: 103.5x67.6x27.5mm.  Wiring Diagram: 

Read more less

MKBMS is based on the modular BMS of LTC68XX and STM32 MCU, and is connected to one or more slave boards and integrated integrated boards of different sizes through the ISOSPI interface. The modular BMS can be configured for various applications with battery voltages within 150V. MKBMS is developed based on the open source materials of DieBieMS and ENNOID BMS. Currently MKBMS is compatible with ENNOID firmware. Here, a special thanks to the developers of open source BMS materials.  Maybe you need more MKBMS options: https://bit.ly/3EQO9Nt  MKBMS Master Board ( MKBMS-LV Master Mini ) Features: With charger voltage measurement, humidity sensor, isolated on-board 5V power supply for isolating CAN bus interface and USB Type-C 30V to 150V operation Voltages measurements for load & battery pack Bi-directional current monitoring (up to 2500A pulsed, 500A continuous) Isolated charger detection circuit Isolated CAN bus interface Daisychain Master/Slave ISOSPI communication Single PCB pattern for bolt-on contactor It can internal power supply or external power supply voltage is 12V Integrated predischarge circuit USB & serial interface for configuring and firmware upgrades with the ENNOID-BMS-Tool OLED display output ON/OFF toggle switch input SWD burn debugging or update firmware interface   MKBMS Slave Board (LTC6811-12W-AL) Features: MKBMS slave board is made of aluminum base plate, which has better heat dissipation effect. Scalable & isolated 1000VDC+ Compatible with MKBMS Master boards From 5 to 18 cell levels monitoring per board Daisychain Master/Slave ISOSPI communication Parameters fully programmable through an easy to use graphical user interface 33 ohm balance resistors (0.125A capacity) on all channels Self powered by monitored cells 1.2mV accuracy, -40 to 120C operation Extra low power consumption (Sleep mode = 6uA) Molex SL horizontal connectors for balance & temperature. (Comes with male, female + crimps)       Variant:      LTC6811 : Up to 12 cells voltage monitoring & 1+4 temperature sensors* per slave       LTC6812 : Up to 15 cells voltage monitoring & 1+8 temperature sensors* per slave      LTC6813 : Up to 18 cells voltage monitoring & 1+8 temperature sensors* per slave    *The first temperature channel is used by slave board itself. The following 4 or 8 temperature sensors are not in the package lists but means an interface to connect 4 temp sensors at most or to connect 8 temp sensors at most. Pack configuration examples: MKBMS monitoring 23S pack : 2 x LTC6811-12S : 12S + 11S ( Optimal)2 x LTC6812-15S : 12S + 11S (Two slaves partially loaded)2 x LTC6813-18S : 12S + 11S (Two slaves partially loaded) MKBMS monitoring 27S pack : 3 x LTC6811-12S: 9S + 9S + 9S (Three slaves partially loaded)2 x LTC6812-15S: 14S + 13S (Optimal)2 x LTC6813-18S: 14S + 13S (Two slaves partially loaded) MKBMS monitoring 29S pack : 3 x LTC6811-12S: 10S + 10S + 9S (Three slaves partially loaded)2 x LTC6812-15S: 15S + 14S ( Optimal)2 x LTC6813-18S: 15S + 14S (Two slaves partially loaded) MKBMS monitoring 30S pack : 3 x LTC6811-12S: 10S + 10S + 10S (Three slaves partially loaded)2 x LTC6812-15S: 15S + 15S ( Optimal)2 x LTC6813-18S: 15S + 15S (Two slaves partially loaded) MKBMS monitoring 35S pack : 3 x LTC6811-12S: 12S+12S+11S (Good)3 x LTC6812-15S: 12S+12S+11S (Three slaves partially loaded)2 x LTC6813-18S: 18S + 17S (Optimal choice) *For uneven cell count in series, only the last slave board in the daisy-chained loop should have one cell less connected than the other slaves. Ex: 39S = 10S + 10S + 10S + 9S     MKBMS battery management system implements the following functions: 1. Current and voltage protection: protect the battery pack from overcharge and overdischarge, thereby extending the cycle life. 2. Battery health monitoring: monitor the internal resistance of a single battery and the monitoring capacity of the battery pack. 3. Thermal management: Overheating and under-temperature protection. 4. Support batteries: Li-Ion, Li-Polymer, Li-Phosphate 5. Intelligent battery balance: passive balance  6. Field programmable 7. Current limit calculation 8. Fully programmable CANBUS interface, programmable structure of all CAN messages 9. Drift state of charge 10. Reliability, speed and accuracy 11. Integration with other devices 12. Multiple BMS units connected in series 13. Current sensor support 14. Isolation from fault detection 15. Automotive grade design, automotive grade locking connector 16. Software for data logging and programming   MKBMS can be roughly divided into three aspects: automobile, industry, and consumption: 1.  Electric vehicles;2.  Electric patrol car;3.  Scenic sightseeing car;4.  Handling robots;5.  Automatic forklift;6.  Electric bicycles;7.  Electric skateboard;8.  Electric tools;9.  Consumer robots, etc. Shipping list: MKBMS Master Board + Slave Board Package 1X   PCBA board MKBMS-LV Master Mini V1.4 2X   GH1.25 single head 2P line 1X   GH1.25 double head 2P same direction line 3X   HY2.0 single head 2P line 2X   GH1.25 single head 5P line 1X   GH1.25-5P to Dupont line 1X   USB cable type-C data cable 1X   2.0MM jumper cap 1X   1.3 inch OLED display LCD screen module 1X   12MM 3-6V button switch 1X   PCBA board LTC6811-12W-AL V1.2 slave board 1X  GH1.25 double head 2P red-black line (for master board)   1X  GH1.25 double head 2P black-white line (for slave board) 1X   HY2.0 single head 5P line 1X   HY2.0 single head 13P line 4X   Nylon column 4X   Nylon nut   MKBMS hardware design file: LTC6811-12W_V1.2 MKBMS-LV_Master_Mini_V1.4

Read more less

Firmware & software repositories are available click here： MAXKGO MAXKGO BMS User Manual:MAXKGO Maxkgo-BMS Privacy Policy (1)Maxkgo-BMS User Protocol (1) Remark:Only Support 6S-28S 12A Smart Only Charge BMS and 6S-24S 150A Smart BMS Specs: ●Type:Smart Charge only ●Cell Chemistry: Li-ion/LiFePO4 ●Number of Battery Strings: 6S-28S ●Charge Current: 12A ●Single cell voltage Sdetection range: 2v-5v,error value:±2mV ●Balance: 28mA@4.2V,Passive balance ●connector:XT30/XT60 ●Short Circuit Protection:Support. ●Bluetooth Function:with Bluetooth ,Support for Android  ●Temperature detection:-30～125℃. ●Voltage support range: 15V-118V ●Abs. Max battery voltage: 120V ●Shutdown Consumption: <80uA ●Quantity of Temperature Detection: 4 Pcs(NTC) ●SoC estimation accuracy:Error:8%(operating conditions). ●Operating power consumption:<40mA(UART/CAN). ●Standby power consumption:<100uA. ●Charge protection Temp: 0°C~100°C ●Charge Temp Reset: 0°C~100°C ●Recommended Working Temp:-20°C~+75°C ●Size: 112.17*33.7*12.8mm Notice:The Each S voltage can only be set to a maximum of 4.2V for 28S battery pack Package Included: 1* MKBMS 6S-28S 12A Smart Only Charge Board(With aluminum shell) 1* Bluetooth module 1* UART module 1* 1.3 inch OLED display LCD screen module 1* 12MM 3-6V key switch 1* GH1.5 single head 5P line 1* GH1.25-5P to Dupont line 1* PH2.0 single head 15P line 1* PH2.0 single head 14P line 1* PH2.0 single head 8P line Wiring Diagram Operation Notes: Please ensure the correctness of the wiring sequence, from B0-B15, B16-B28, the voltage increases from low to high in sequence. This BMS is compatible with battery packs up to 28s, which is over 118V when fully charged. Electric shocks from high voltage may cause serious injury.Please pay attention to safety when using. This device can only be used for charging to reduce the risk of overcharging, but cannot prevent Discharge over-current, short circuit, and over-discharge.

Read more less

MKBMS is based on the modular BMS of LTC68XX and STM32 MCU, and is connected to one or more slave boards and integrated integrated boards of different sizes through the ISOSPI interface. The modular BMS can be configured for various applications with battery voltages within 150V. The Lipo Battery Management System Red Board is a must-have for any expert in the field. With its Smart Master slave BMS, it can handle up to 500A and is compatible with ENNOID Firmware and VESC technology. Say goodbye to battery management complications and hello to efficient and reliable power. MKBMS is developed based on the open source materials of DieBieMS and ENNOID BMS. Currently MKBMS is compatible with ENNOID firmware. Here, a special thanks to the developers of open source BMS materials. Maybe you need more MKBMS options: https://bit.ly/3EQO9Nt  Tutorial on MAXKGO BMS settings with VESC MKBMS battery management system implements the following functions: 1. Current and voltage protection: protect the battery pack from overcharge and overdischarge, thereby extending the cycle life. 2. Battery health monitoring: monitor the internal resistance of a single battery and the monitoring capacity of the battery pack. 3. Thermal management: Overheating and under-temperature protection. 4. Support batteries: Li-Ion, Li-Polymer, Li-Phosphate 5. Intelligent battery balance: passive balance  6. Field programmable 7. Current limit calculation 8. Drift state of charge 9. Reliability, speed and accuracy 10. Integration with other devices 11. Multiple BMS units connected in series 12. Current sensor support 13. Isolation from fault detection 14. Automotive grade design, automotive grade locking connector 15. Software for data logging and programming   MKBMS can be roughly divided into three aspects: automobile, industry, and consumption: 1.  Electric vehicles;2.  Electric patrol car;3.  Scenic sightseeing car;4.  Handling robots;5.  Automatic forklift;6.  Electric bicycles;7.  Electric skateboard;8.  Electric tools;9.  Consumer robots, etc. Shipping list: MKBMS-LV Master Mini Package 1X   PCBA board MKBMS-LV Master Mini V1.4 2X   GH1.25 single head 2P line 1X   GH1.25 double head 2P same direction line 3X   HY2.0 single head 2P line 2X   GH1.25 single head 5P line 1X   GH1.25-5P to Dupont line 1X   USB cable type-C data cable 1X   2.0MM jumper cap 1X   1.3 inch OLED display LCD screen module 1X  12MM 3-6V button switch   MKBMS-LV Master Mini+ Wiring Terminal Package 1X PCBA board MKBMS-LV Master Mini V1.4 motherboard 2X GH1.25 single head 2P line 1X GH1.25 double head 2P same direction line 3X HY2.0 single head 2P line 2X GH1.25 single head 5P line 1X GH1.25-5P to Dupont line 1X USB cable type-C data cable 1X 2.0MM jumper cap 1X 1.3 inch OLED display LCD screen module 1X 12MM 3-6V key switch 4X 90 degree angle terminal block T90-25/8 (red copper) 2X M8*16 stainless steel round head screws (stainless steel) 2X M8*Stainless steel nuts (stainless steel) 4X M8 Copper Gasket (Red Copper)   MKBMS-LV Master Mini + Main Contactor K4415Package 1X PCBA board MKBMS-LV Master Mini V1.4 motherboard 2X GH1.25 single head 2P line 1X GH1.25 double head 2P same direction line 3X HY2.0 single head 2P line 2X GH1.25 single head 5P line 1X GH1.25-5P to Dupont line 1X USB cable type-C data cable 1X 2.0MM jumper cap 1X 1.3 inch OLED display LCD screen module 1X 12MM 3-6V key switch 1x TE2299223-2 EVC500 Main Contactor 1X HY2.0 single head 2P line   MKBMS-LV Master Mini + DC-DC Step-down module Package 1X PCBA board MKBMS-LV Master Mini V1.4 motherboard 2X GH1.25 single head 2P line 1X GH1.25 double head 2P same direction line 3X HY2.0 single head 2P line 2X GH1.25 single head 5P line 1X GH1.25-5P to Dupont line 1X USB cable type-C data cable 1X 2.0MM jumper cap 1X 1.3 inch OLED display LCD screen module 1X 12MM 3-6V key switch 1X DC-DC step-down power supply module   MKBMS hardware design file: LTC6811-12W_V1.2 MKBMS-LV_Master_Mini_V1.4    

Read more less

  MKBMS-HV Master MKBMS is based on the modular BMS of LTC68XX and STM32 MCU, and is connected to one or more slave boards and integrated integrated boards of different sizes through the ISOSPI interface. The modular BMS can be configured for various applications with battery voltages within 400V. The MAXKGO 400V HV Master Board is a smart component that supports up to 500A Charging and discharging and works with VESC and Ennoid systems. This high-voltage input 450V to 12V step-down board is perfect for powering your devices, providing a safe and efficient power supply.  MKBMS HV Master MiniBoard Features With charger voltage measurement, humidity sensor, isolated on-board 5V power supply for isolating CAN bus interface and USB Type-C 150V to 400V operation(Requires use with a 450V-12V step-down module) Voltages measurements for load & battery pack Bi-directional current monitoring (up to 2500A pulsed, 500A continuous) Isolated charger detection circuit Isolated CAN bus interface Daisychain Master/Slave ISOSPI communication Single PCB pattern for bolt-on contactor It can internal power supply or external power supply voltage is 12V Integrated predischarge circuit USB & serial interface for configuring and firmware upgrades with the ENNOID-BMS-Tool OLED display output ON/OFF toggle switch input SWD burn debugging or update firmware interface Shipping List MKBMS-HV Master BoardPackage 1X   PCBA board MKBMS-HVMaster Board 2X   GH1.25 single head 2P line 1X   GH1.25 double head 2P same direction line 5X   HY2.0 single head 2P line 2X   GH1.25 single head 5P line 1X   GH1.25-5P to Dupont line 1X   USB cable type-C data cable 1X   2.0MM jumper cap 1X   1.3 inch OLED display LCD screen module 1X   Switch DCDC 450V to 12V Step-down Power Supply Module Output characteristics Input voltage：150-450VDC Output voltage：12V/4.2A Output voltage accuracy：±1% Ioading effect：10%~100%Ionom △Voutnom≤±0.2% Source effect：Vinmin~Vinmax △Voutnom≤±0.2% Ripple：100mV Conversion efficiency：80% （Typical value） Temperature Coefficient：≤±0.02%/℃（Maximum） Shipping list 1X  MAXKGODC-DC450Vto12VConverter 1X  GH2.0 single head2P cable（With buckle） 1X  Power cable

Read more less

MKBMS is based on the modular BMS of LTC68XX and STM32 MCU, and is connected to one or more slave boards and integrated integrated boards of different sizes through the ISOSPI interface. The modular BMS can be configured for various applications with battery voltages within 150V. MKBMS Master Board ( MKBMS-LV Master Mini ) Features: With charger voltage measurement, humidity sensor, isolated on-board 5V power supply for isolating CAN bus interface and USB Type-C 17V to 150V operation Voltages measurements for load & battery pack Bi-directional current monitoring (up to 2500A pulsed, 500A continuous) Isolated charger detection circuit Isolated CAN bus interface Daisychain Master/Slave ISOSPI communication Single PCB pattern for bolt-on contactor It can internal power supply or external power supply voltage is 12V Integrated predischarge circuit USB & serial interface for configuring and firmware upgrades with the ENNOID-BMS-Tool OLED display output ON/OFF toggle switch input SWD burn debugging or update firmware interface   MKBMS Slave Board Features: MKBMS slave board is made of aluminum base plate, which has better heat dissipation effect. Scalable & isolated 1000VDC+ Compatible with MKBMS Master boards From 5 to 18 cell levels monitoring per board Daisychain Master/Slave ISOSPI communication Parameters fully programmable through an easy to use graphical user interface 33 ohm balance resistors (0.125A capacity) on all channels Self powered by monitored cells 1.2mV accuracy, -40 to 120C operation Extra low power consumption (Sleep mode = 6uA) Molex SL horizontal connectors for balance & temperature. (Comes with male, female + crimps)       Variant:      LTC6811 : Up to 12 series-connected battery cells & 1+4 temperature sensors* per slave      LTC6812 : Up to 15 series-connected battery cells & 1+8 temperature sensors* per slave      LTC6813 : Up to 18 series-connected battery cells & 1+8 temperature sensors* per slave      *The first temperature channel is used by slave board itself. The following 4 or 8 temperature sensors are not in the package lists but means an interface to connect 4 temp sensors at most or to connect 8 temp sensors at most. *For uneven cell count in series, only the last slave board in the daisy-chained loop should have one cell less connected than the other slaves. Ex: 39S = 10S + 10S + 10S + 9S MKBMS battery management system implements the following functions: 1. Current and voltage protection: protect the battery pack from overcharge and overdischarge, thereby extending the cycle life. 2. Battery health monitoring: monitor the internal resistance of a single battery and the monitoring capacity of the battery pack. 3. Thermal management: Overheating and under-temperature protection. 4. Support batteries: Li-Ion, Li-Polymer, Li-Phosphate 5. Intelligent battery balance: passive balance  6. Field programmable 7. Current limit calculation 8. Fully programmable CANBUS interface, programmable structure of all CAN messages 9. Drift state of charge 10. Reliability, speed and accuracy 11. Integration with other devices 12. Multiple BMS units connected in series 13. Current sensor support 14. Isolation from fault detection 15. Automotive grade design, automotive grade locking connector 16. Software for data logging and programming MKBMS can be roughly divided into three aspects: automobile, industry, and consumption: 1.  Electric vehicles;2.  Electric patrol car;3.  Scenic sightseeing car;4.  Handling robots;5.  Automatic forklift;6.  Electric bicycles;7.  Electric skateboard;8.  Electric tools;9.  Consumer robots, etc. Video: Shipping list: MKBMS-LV Master Mini Package 1X   PCBA board MKBMS-LV Master Mini V1.4 2X   GH1.25 single head 2P line 1X   GH1.25 double head 2P same direction line 3X   HY2.0 single head 2P line 2X   GH1.25 single head 5P line 1X   GH1.25-5P to Dupont line 1X   USB cable type-C data cable 1X   2.0MM jumper cap 1X   1.3 inch OLED display LCD screen module 1X  12MM 3-6V button switch   LTC6811-12S Package 1X   PCBA board LTC6811-12W-AL V1.2 slave board 1X  GH1.25 double head 2P red-black line (for master board)   1X  GH1.25 double head 2P black-white line (for slave board) 1X   HY2.0 single head 5P line 1X   HY2.0 single head 13P line 4X   Nylon column 4X   Nylon nut     LTC6813-18S  Package 1X PCBA board LTC6813-18S V1.4 slave board 1X  GH1.25 double head 2P red-black line (for master board)   1X  GH1.25 double head 2P black-white line (for slave board) 1X HY2.0 single head 6P line 1X HY2.0 single head 13P line 1X HY2.0 single head 16P line 4X nylon column 4X nylon nut   LTC6812-15S  Package—— 1X   PCBA board LTC6812-15S slave board 1X  GH1.25 double head 2P red-black line (for master board)   1X  GH1.25 double head 2P black-white line (for slave board) 2X   HY2.0 single head 8P line 1X   HY2.0 single head 16P line 4X   Nylon column 4X   Nylon nut    MKBMS hardware design file: LTC6811-12W_V1.2 MKBMS-LV_Master_Mini_V1.4

Read more less

MKBMS is based on the modular BMS of LTC6811, and is connected to one or more slave boards and integrated boards of different sizes through the ISOSPI interface.  LTC6211 12S Slave BMS Features —— 1. Aluminum alloy PCB, better heat dissipation effect. 2. Compatible with MKBMS and ENNOID BMS. 3. from 5-12 series-connected battery cells per board. 4. 1+4 temperature sensors per slave. 5. Self-powered by the monitored cells. 6. Ultra-low power consumption, sleep mode = 6uA. 7.It can be connected to multiple slave boards to form an integrated board through the ISOSPI interface 8.Daisychain Master ISOSPI communication 9.1.2mV accuracy, -40 to 120C operation 10.33 ohm balance resistors (0.125A capacity) on all channels 11.Scalable & isolated 1000VDC+ 12.Molex SL horizontal connectors for balance & temperature. (Comes with male, female + crimps) Note:　The first temperature channel is used by slave board itself. The following 4 temperature sensors are not in the package lists,  but means an interface to connect 4 temp sensors at most.  Shipping List: 1X   PCBA board LTC6811-12W-AL V1.2 slave board 2X   GH1.25 double head 2P same direction line 1X   HY2.0 single head 5P line 1X   HY2.0 single head 13P line 4X   Nylon column 4X   Nylon nut  

Read more less