Description MKBMS is based on the modular BMS of LTC68XX and STM32 MCU, and is connected to one or more slave boards and integrated integrated boards of different sizes through the ISOSPI interface. The modular BMS can be configured for various applications with battery voltages within 150V.
MKBMS Master Board ( MKBMS-LV Master Mini ) Features:
With charger voltage measurement, humidity sensor, isolated on-board 5V power supply for isolating CAN bus interface and USB Type-C
17V to 150V operation
Voltages measurements for load & battery pack
Bi-directional current monitoring (up to 2500A pulsed, 500A continuous)
Isolated charger detection circuit
Isolated CAN bus interface
Daisychain Master/Slave ISOSPI communication
Single PCB pattern for bolt-on contactor
It can internal power supply or external power supply voltage is 12V
Integrated predischarge circuit
USB & serial interface for configuring and firmware upgrades with the ENNOID-BMS-Tool
OLED display output
ON/OFF toggle switch input
SWD burn debugging or update firmware interface
MKBMS Slave Board Features:
MKBMS slave board is made of aluminum base plate, which has better heat dissipation effect.
Scalable & isolated 1000VDC+
Compatible with MKBMS Master boards
From 5 to 18 cell levels monitoring per board
Daisychain Master/Slave ISOSPI communication
Parameters fully programmable through an easy to use graphical user interface
33 ohm balance resistors (0.125A capacity) on all channels
Self powered by monitored cells
1.2mV accuracy, -40 to 120C operation
Extra low power consumption (Sleep mode = 6uA)
Molex SL horizontal connectors for balance & temperature. (Comes with male, female + crimps)
Variant:
*The first temperature channel is used by slave board itself.
The following 4 or 8 temperature sensors are not in the package lists
but means an interface to connect 4 temp sensors at most or to connect 8 temp sensors at most.
*For uneven cell count in series, only the last slave board in the daisy-chained loop should have one cell less connected than the other slaves. Ex: 39S = 10S + 10S + 10S + 9S
MKBMS battery management system implements the following functions:
1. Current and voltage protection: protect the battery pack from overcharge and overdischarge, thereby extending the cycle life.
2. Battery health monitoring: monitor the internal resistance of a single battery and the monitoring capacity of the battery pack.
3. Thermal management: Overheating and under-temperature protection.
4. Support batteries: Li-Ion, Li-Polymer, Li-Phosphate
5. Intelligent battery balance: passive balance
6. Field programmable
7. Current limit calculation
8. Fully programmable CANBUS interface, programmable structure of all CAN messages
9. Drift state of charge
10. Reliability, speed and accuracy
11. Integration with other devices
12. Multiple BMS units connected in series
13. Current sensor support
14. Isolation from fault detection
15. Automotive grade design, automotive grade locking connector
16. Software for data logging and programming
MKBMS can be roughly divided into three aspects: automobile, industry, and consumption:
1. Electric vehicles;
Video:
VIDEO Shipping list:
MKBMS-LV Master Mini Package
1X PCBA board MKBMS-LV Master Mini V1.4
2X GH1.25 single head 2P line
1X GH1.25 double head 2P same direction line
3X HY2.0 single head 2P line
2X GH1.25 single head 5P line
1X GH1.25-5P to Dupont line
1X USB cable type-C data cable
1X 2.0MM jumper cap
1X 1.3 inch OLED display LCD screen module
1X 12MM 3-6V button switch
LTC6811-12S Package
1X PCBA board LTC6811-12W-AL V1.2 slave board
1X GH1.25 double head 2P red-black line (for master board)
1X GH1.25 double head 2P black-white line (for slave board)
1X HY2.0 single head 5P line
1X HY2.0 single head 13P line
4X Nylon column
4X Nylon nut
LTC6813-18S Package
1X PCBA board LTC6813-18S V1.4 slave board
1X GH1.25 double head 2P red-black line (for master board)
1X GH1.25 double head 2P black-white line (for slave board)
1X HY2.0 single head 6P line
1X HY2.0 single head 13P line
1X HY2.0 single head 16P line
4X nylon column
4X nylon nut
LTC6812-15S Package——
1X PCBA board LTC6812-15S slave board
1X GH1.25 double head 2P red-black line (for master board)
1X GH1.25 double head 2P black-white line (for slave board)
2X HY2.0 single head 8P line
1X HY2.0 single head 16P line
4X Nylon column
4X Nylon nut
MKBMS hardware design file:
LTC6811-12W_V1.2
MKBMS-LV_Master_Mini_V1.4
