Specifications:   Weight 0.84KG   Max Power 2700W Motor KV 140190 Max current 75A Battery type 4-14S Recommend ESC VESC6 Max Torque 7.5Nm Diameter(mm) 63 Length(mm) 68 Total length (mm)92mm Shaft(mm) 10mm Dshaft Bullet connector 4mm   Wire configuration   Blue = U White = V Yellow = W BLDC Motor

Read more less

Speciation: Size:L107mm*W103mm*H18.5mmVoltage:14-84V (4-20S safey)Current:continuous max 100A single,dual continuous max 200A,values depend on the mounting  and ambient temperature around the device!BEC:5V@1ASupport BLDC square wave mode control and FOC sine wave modeFirmware: latest (firmware update supported)ERPM:150000Control Interface Ports:USB,CAN,UARTSupported Sensors:ABI，HALL，AS5047，AS5048AInput Set Support:PPM，ADC，NRF,UARTWire Size: 12AWGProgrammable: YesRegenerative Capacity: Yes Warm tips: Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Wire Connection:

Read more less

Specs: 75100: 75100 Pro: Size: L103mm*W58mm*H27.7mm Voltage:14-84V (4-20S) Current:100A Continuous,burst 120A BEC:5V@1.5A Support BLDC square wave mode control and FOC sine wave mode Firmware: latest (firmware update supported) ERPM:150000 Control Interface Ports:USB,CAN,UART Supported Sensors:ABI，HALL，AS5047，AS5048A Input Set Support:PPM，ADC，NRF,UART Wire Size: 10AWG(75100 Pro) Programmable: Yes Regenerative Capacity: Yes Newly upgraded: Change connection wires from 12Awg to 10Awag. More sensitive temperature detection function Integrated bluetooth module design Size & design upgraded Warm tips: Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.Here below video and blog links FYI. Wire Connection: 75100: 75100 Pro:

Read more less

Specication: Size: 103X58X24mmVoltage:14-84V (4-20S)Continuous Current: 100APeak Current: 250AFirmware: 5.02; firmware upgrade available (Phase filter needs to be turned off for firmware 5.03 or newer)BEC: 5V@1AModes: DC，BLDC，FOC(sinusoidal)Control Interface Ports: USB,CAN,UARTSupported Sensors: ABI，HALL，AS5047，AS5048AInput Set Support: PPM，ADC，NRF,UARTWire Size: 12AWGProgrammable: YesRegenerative Capacity: YesPower Switch Button: Red Wire Connection:

Read more less

Specification: Wire Connection:

Read more less

Specs: 75100 Size:L103mm*W58mm*H18.5mm+5.9mm USB TYPE Voltage:14-84V (4-20S) Current:100A Continuous,burst 120A BEC:5V@1.5A Phase filter: No Support BLDC square wave mode control and FOC sine wave mode Firmware: latest (firmware update supported) ERPM:150000 Control Interface Ports:USB,CAN,UART Supported Sensors:ABI，HALL，AS5047，AS5048A Input Set Support:PPM，ADC，NRF,UART Wire Size: 12AWG(75100) Programmable: Yes Regenerative Capacity: Yes Product Details &Wire Conection: With Outer Shell: With Water Cooling: Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC. Please be careful to limit the Absolute Maximum Current below 250A,setting page New and old shells are shipped randomly 75100 With Water Cooling Enclosure Manual Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.Here below video and blog links FYI.

Read more less

Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC. Specs: Firmware: 5.2, supports firmware upgradeVoltage: 14-84V (safe for 4-20S)Continuous current: 50V/200A; 75V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 300ABEC: 5V@1ASupport Modes: DC, BLDC, FOC (sinusoidal)ERPM: 150000Communication Ports: USB, CAN, UART, SPI, IICSupported Sensors: ABI, HALL, AS5047, AS5048AInput Source Support: PPM, ADC, NRF, UARTSupported Sensorless: YesRegenerative capacity: YesProgrammable via VESC_TOOL: Yes75200 Size:130x67.7x40.1mm(Including alu. case)Motor/power wire size: 8 AWGFeatures:Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection.Support various control modes: Current / Duty cycle / Speed / PID control modes.Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.CPU:32F405 with frequency 168MHzAluminum PCB with good heat dissipation to expand life span.Two COMM ports: UART bluetooth module, screen display or remote controller supportable. Warm tips: Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Wire Connection:

Read more less

Specifications:  KV: 140/170/190 Max Power: 3500Watts Max Current: 85 Amps Max Volts: 14S Max Torque:8Nm Motor Resistance: 0.05Ohm Recommend ESC: 3-12S 50A (FSESC4.12 50AorFSESC 6.6 60A) The number of pole: 14 Net weight: 980g Motor wire:12AWG Wire Configuration Blue=U (A) Yellow=V (B) Green= W (C) Shaft Size: 8MM / 10MM   Reference Information: 1.The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts. 2.Screws to mount the motor are not included with the motor. 3.If you choose round shaft motor, shipping includes the key for the keyway 4.If you choose the shipping comes with pulley, will come with 8mm steel material pulley. 5.The Flipsky logo is in different places, will be shipped randomly.

Read more less

Specs: Firmware: Latest Version Continuous current: single 70A, dual 140A; instantaneous current: single 200A, dual 400A Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! ) BEC: 5V@1A ERPM: 150000 Control Interface Ports:USB,CAN,UART Supported Sensors:ABI，HALL，AS5047，AS5048A Input Set Support:PPM, ADC, NRF, UART, SPI, IIC (for IMU) Modes:DC, BLDC, FOC (sinusoidal) Regenerative capacity: Yes Programmable: Yes Motor wire: 12AWG Power cable:14AWG (with XT90 connector) Size: 79.8 x 66.8 x 17.8 mm(Including heatsink) Feature: Support four control modes: Current/Dutycycle/Speed /Position control mode. Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection. Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160. Wiring diagram:

Read more less

Specifaction: Voltage:14-84V( safe for 3-20S)Continuous Current : 50V/300A,75V/200AMax Current :350ASupported sensors: ABI, HALL, AS5047,AS5048AEPRM:150000Size:297*115*45mm((Including the height of water pipes and electrolytic capacitors) Feature: Regenerative brakingThe CPU adopts the 32F405 with the main frequency of 168MHz and the Cortex-M4 architecture with DSP function;Sensored or sensorless operation + hybrid modeConfigurable RPM-, current-, voltage- and power limitsInput source: PPM, ADC, NRF,UART,PASCommunication ports: USB, CAN, UART,SPI,IICThrottle curve and ramping for all input sourcesSeamless 4-quadrant operationMotor revolution, ampere hour, watt hour countingReal-time data analysis and readout through the communication port.Adjustable protection against:Low input voltageHigh input voltageHigh motor currentHigh input currentHigh regenerative braking current (separate limits for the motor and the input)High RPM (separate limits for each direction)Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurateMotor wire: 8AWGPower cable: 8AWGWaterproof level(with water cooling enclosure):IP67 Wire Connection:

Read more less

Specifications: Voltage:14-84V( safe for 3-20S) Continuous Current : 50V/350A,75V/250A Max Current :800A Supported sensors: ABI, HALL, AS5047,AS5048A EPRM:150000 Size:200*94.6*50mm((Including the height of water pipes and electrolytic capacitors) Warm tips: Phase filering is not available for Flipsky ESC75100 and 75200 ! Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface. Feature: 1.Regenerative braking 2.The CPU adopts the 32F405 with the main frequency of 168MHz and the Cortex-M4 architecture with DSP function; 3.Sensored or sensorless operation + hybrid mode 4.Configurable RPM-, current-, voltage- and power limits 5.Input source: PPM, ADC, NRF,UART,PAS 6.Communication ports: USB, CAN, UART,SPI,IIC 7.Throttle curve and ramping for all input sources 8.Seamless 4-quadrant operation 9.Motor revolution, ampere hour, watt hour counting 10.Real-time data analysis and readout through the communication port. 11.Adjustable protection against: 12.Low input voltage 13.High input voltage 14.High motor current 15.High input current 16.High regenerative braking current (separate limits for the motor and the input) 17.High RPM (separate limits for each direction) 18.Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurate. 19.Motor wire: 8AWG 20.Power cable: 8AWG 21.Waterproof level(with water cooling enclosure):IP67 Wire Connection:

Read more less

Specs： Hardware:V4.20Firmware:Latest VersionCurrent:50A continuous/single, 100A continuous/dual , Instantaneous current 150A per single, total 300A for system instantaneous current.Voltage: 8V-60V (Cells: 3-13S LiPo,Safe for 3S to 12S LiPo，Voltage spikes may not exceed 60V! )ERPM:60000BEC: 5V@1.5ABEC type: Internal driver support Modes: DC, BLDC, FOC (sinusoidal)Timing: Software calibration Cutoff Voltage: ProgrammableFrequency: PWM input Governor: NoProgramming card: NoReverse: YesMotor wire: 12AWG Power cable: 12AWG Package Contents:  1*Dual FSESC4.20 + Heatsink2*VESC Sensor Wires1*Micro USB 1*Manual Wire Connection:

Read more less