5-12S 80A_ESC Description： The 5-12S80A_ESC is a high-performance brushless electronic speed controller that supports an input of 5-12S lithium batteries and has a continuous current rating of 80A. It is widely applicable to FPV racing drones, multi-rotor drones, fixed-wing model aircraft, RC model cars, model boats, agricultural spray drones, etc.   5-12S80A_ESC Parameters： Type: Brushless Motor Electronic Speed Controller(ESC) Continuous Current: 80A Instantaneous Current: 100A Net Weight(excluding capacitors): 19.2g±2g  Size: 46.4mm (L) × 24.8mm (W) × 9.6mm (H) Input Power Supply: 5S-12S LiPo Firmware Version: AM32_MAXKGO_F421 Firmware Upgrade: Supports online upgrade via AM32.ca Communication Protocol: Dshot 300, Dshot 600, Servo PWM Signal Feedback: The TX telemetry feedback port can provide ESC voltage, temperature, motor speed and etc( This ESC does not have current detection). 5-12S80A_ESC Features： 1.MINI Size,MAX Power output.2.Supports multiple protection functions: Low-voltage protection, over-temperature protection, motor stall protection, low-speed protection. 3.Equipped with high-performance ARM 32-bit Cortex-core MCU, operating frequency up to 120 MHz. 4.Provides stall protection for model cars and crawlers. 5.Provides paddle stuck (locked-rotor) protection function for multi rotor aircraft. 6.Supports to upgrade firmware via Betaflight, Passthrough, single-wire UART or Arduino. 7.Supports parameter configuration via the AM32.ca web configuration tool. 8.Supports Servo PWM and Dshot300/600 communication Protocol. 9.Supports EDT (Extended Dshot Telemetry). Complete telemetry data can be obtained via signal wire. 10.Equipped with sine wave startup mode to provide smoother startup performance for model cars and crawlers.     5-12S80A_ESC Application Fields： Multi-rotor Drone Fixed-wing Model Aircraft RC Model Car Model Boat   Mountings： Option 1: 5-12S80A_ESC *1Heat Shrink Tubing *5Electrolytic Capacitor *1（63V 680μF）2pin DuPont*1（33cm） Option 2: 5-12S80A_ESC *1Heat Shrink Tubing *5Electrolytic Capacitor *1（63V 680μF） 2pin DuPont*1（33cm） 3pin DuPont*1（33cm）XT90 Male Connector *1Black Power Cable*1（12AWG，120mm） Red Power Cable *1（12AWG，120mm）

Lesen Sie Mehr Weniger

4IN1_8S80A_ESC Description： The 4IN1_8S80A_ESC is a high-performance brushless electronic speed controller that supports an input of 4-8S lithium batteries and has a continuous current rating of 80A. It is widely applicable to FPV racing drones, multi-rotor drones, VTOL Fixed-wing UAV , etc.   4IN1_8S70A_ESC Parameters： Type: Brushless Motor Electronic Speed Controller Continuous Current: 80A Peak Current: 100A Weight of bare board (excluding capacitors): 12.5g   Weight of the ESC with heat sink (excluding capacitors): 17.9g±2g Size: 42.2 mm (L) × 43.8mm (W) × 7.4mm (H) Mounting hole spacing: 30.5*30.5mm Mounting aperture: 4mm (M4) Input Power Supply: 4S-8S LiPo Firmware Version: MAXKGO_4IN1_F421 Firmware Upgrade: Supports online upgrade via AM32.ca Communication Protocol: Dshot 300, Dshot 600, Servo PWM Signal Feedback: The TX telemetry feedback port can provide ESC voltage, current, temperature, motor speed and etc. Waterproof: Not support4IN1_8S70A_ESC Features： 1.MINI Size,MAX Power output. 2.Supports multiple protection functions: Low-voltage protection, over-temperature protection, motor stall protection, low-speed protection. 3.Equipped with high-performance ARM 32-bit Cortex-core MCU, operating frequency up to 120 MHz. 4.Provides paddle stuck (locked-rotor) protection function for multi rotor aircraft. 5.Supports to upgrade firmware via Betaflight, Passthrough, single-wire UART or Arduino. 6.Supports parameter configuration via the AM32.ca web configuration tool. 7.Supports Servo PWM and Dshot300/600 communication Protocol. 8.Supports EDT (Extended Dshot Telemetry). Complete telemetry data can be obtained via signal wire. 4IN1_8S70A_ESC Application Fields： Multi-rotor Drone Fixed-wing Model Aircraft FPV drone Multi-rotor drone VTOL Fixed-wing UAV   Package Content： Option 1: 4IN1_8S70A_ESC *18pin Double-Ended Terminal Wire *1（25mm SH1.0） 8Pin single-head terminal wire  *1 (60mm, SH1.0 terminal) 8Pin empty terminal head  * 1 (SH1.0 terminal) Vibration Damping Ball *5（M3*8） Fixing nuts (M3)*5 Solid Capacitor *1（35V 820μF）XT60 Male Connector *1 Black Power Cable*1（12AWG，120mm） Red Power Cable *1（12AWG，120mm） Option 2: 4IN1_8S70A_ESC*1 heat sink  *1 (installed at the esc before shipment) 8Pin double-ended terminal wire *1 (25mm, SH1.0 terminal) 8Pin single-head terminal wire x 1 (60mm, SH1.0 terminal) 8Pin empty terminal head x 1 (SH1.0 terminal) Damping ball *5 (M3 * 8) Fixing nuts (M3)*5 Solid capacitor *1 (35V 820μF) XT60 male connector *1 4IN1_8S70A_ESC Application Fields： Multi-rotor Drone Fixed-wing Model Aircraft Mountings： 4IN1_8S70A_ESC *18pin Double-Ended Terminal Wire *1（25mm SH1.0）Vibration Damping Ball *5（M3*8）Solid Capacitor *1（35V 820μF）XT60 Male Connector *1 Black Power Cable*1（12AWG，120mm） Red Power Cable *1（12AWG，120mm）Sealed plastic box

Lesen Sie Mehr Weniger

5-12S200A MINI ESC Specifications Parameter Details Type Brushless Motor Electronic Speed Controller Continuous Current 200A Instantaneous Current 250A Weight Net Weight 140±5g Gross Weight 360g Size 84mm (L) × 43mm (W) × 28mm (H) Input Power Supply 5S–12S LiPo Firmware Version MAXKGO_12S_F421 Firmware Upgrade Supports online upgrade via AM32.ca Communication Protocol Dshot 300, Dshot 600, Servo PWM Signal Feedback The TX wire/signal wire feeds back ESC voltage, current, temperature and motor speed Built-in Capacitors We've already soldered three 63V 1000μF capacitors at the power input, so there's no need to add extra ones. 5-12S200A MINI ESC Features Feature Category Description Compact Design MINI Size Protection Functions Supports multiple protection functions: Low-voltage protection, over-temperature protection, motor stall protection, low-speed protection MCU Performance High-performance ARM 32-bit Cortex-core MCU with an operating frequency of 120 MHz RC Car Support Stall protection for RC cars and crawlers Drone Protection Stuck rotor protection for multi-rotor drones Firmware Upgrade Firmware upgradable via Betaflight passthrough, single wire serial, or Arduino Web Configurator Web configurator at am32.ca Protocol Support Supports Dshot 300, Dshot 600 and Servo PWM communication protocol Telemetry Support EDT for full Dshot telemetry via signal wires Smooth Startup Sinusoidal startup mode for smoother starting on RC cars and crawlers 5-12S200A MINI ESC Application Fields Application Usage 🚁 Multi-rotor Drone High-performance UAV and FPV applications ✈️ Fixed-wing Model Aircraft Fixed-wing RC aircraft and EDF systems 🚗 RC Model Car High-power RC cars and crawlers 🚤 Model Boat Brushless RC boat applications 🌾 Plant Protection Machine Agricultural UAV and spraying drone systems   Shipping List： 5-12S200AMINI_ESC Main Unit *1 Heat Shrink Tubes *5 PH2.0 Communication Cable *1

Lesen Sie Mehr Weniger

Describe: (1) Adopt 32-bit high-performance processor AT32F421, with working frequency 120MHz and maximum motor PWM frequency 128KHz . (2) Adopt high-power MOSFETs and heatsink with good heat dissipation performance in high current. (3) Support multiple motion modes such as uni-direction, bi-direction with braking etc.Net Weight 89±5g   (4) Support low voltage protection, temperature protection, locked rotor protection, current protection etc. (5) The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot. (6) Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings. (7) Widely used in model airplane plant protection machines, multi-rotor drones, RC model ships and cars. 2. Parameters of Product Model MAXKGO 5-12S 120A_ESC Processor AT32F421 Input voltage DC 18V-50.4V（5-12S Lipo） Continuous current (good heat dissipation) 120A Maximum current  (good heat dissipation) 150A Support firmware AM32 Signal protocol Dshot (All),PWM,Oneshot,Multishot,etc. Programming parameter adjustment Support Throttle calibration Support Timing angle setting Support Current detection Support Telemetry signal Support Motor steering settings Support Application scenarios Suitable for multi-axis drones, fixed-wing aircraft models, multi-rotor drones, plant protection machines, model ships, RC model cars, and rock crawlers. 5-12S120A_ESC Features： MINI SizeSupports various protection functions: low-voltage protection, temperature protection, locked-rotor protection, and low-speed protection High-performance ARM 32-bit Cortex-core MCU with an operating frequency of 120 MHz   5-12S120A_ESC Application Fields： Multi Axis UAV (Unmanned Aerial Vehicle) Fixed-wing model aircraft Multi-rotor model aircraft RC model car Model boat Packing List： 5-12S120A_ESC Main Unit * 1 Heat Shrink Tubing * 5 PH2.0 Communication Cable * 1

Lesen Sie Mehr Weniger

Description： The 5-14S100A_ESC is a high-performance brushless electronic speed controller that supports an input of 5-14S lithium batteries and has a continuous current rating of 100A. It is widely applicable to FPV racing drones, multi-rotor drones, fixed-wing model aircraft, RC model cars, model boats, agricultural spray drones, etc. 5-14S100A ESC Specifications Parameter Details Type Brushless Motor Electronic Speed Controller Continuous Current 100A Instantaneous Current 130A Weight Net Weight 72.6 ±5g  Size 68.5mm (L) × 34mm (W) × 24.5mm (H) Input Power Supply 5S–14S LiPo Firmware Version MAXKGO_V1_F421 Firmware Upgrade Supports online upgrade via AM32.ca Communication Protocol Dshot 300, Dshot 600, Servo PWM Signal Feedback The TX wire/signal wire feeds back ESC voltage, current, temperature and motor speed 5-14S100A ESC Features Feature Category Description Compact & Powerful MINI Size, MAX Power Protection Functions Supports low-voltage protection, over-temperature protection, motor stall protection, and low-speed protection MCU Performance High-performance ARM 32-bit Cortex-core MCU with an operating frequency of 120 MHz Car & Crawler Support Stall protection for cars and crawlers Multi-Rotor Safety Stuck rotor protection for multi-rotors Firmware Upgrade Firmware upgradable via Betaflight passthrough, single wire serial, or Arduino Web Configurator Web configurator available at am32.ca Protocol Support Supports Servo PWM and Dshot300/600 Telemetry EDT for full Dshot telemetry via signal wires Smooth Startup Sinusoidal startup mode for smoother starting on cars and crawlers 5-14S100A ESC Application Fields Application Usage 🚁 Multi-rotor Drone High-performance UAV and FPV applications ✈️ Fixed-wing Model Aircraft Fixed-wing RC aircraft and EDF systems 🚗 RC Model Car High-power RC cars and crawlers 🚤 Model Boat Brushless RC boat applications   Shipping List： 5-14S100A_ESC Main Unit 1 Heat Shrink Tubes *5 PH2.0 Communication Cable *1   Optional： XT90 Connector *1 10AWG * 2 PH2.0 3 wire Communication Cable *1

Lesen Sie Mehr Weniger