Beschreibung
5-12S 80A_ESC
Description：
5-12S 80A ESC is a high-performance brushless electronic speed controller (ESC) that supports 5-12S LiPo battery input and delivers a continuous current rating of up to 80A. It is widely used in FPV racing drones, multi-rotor drones, fixed-wing aircraft, RC cars, RC boats, and other model applications.
5-12S 80A ESC Specifications
-
Type: Brushless Motor Electronic Speed Controller (ESC)
-
Continuous Current: 80A
-
Burst Current: 100A
-
Weight (without capacitor): Net Weight 19.2g ± 2g
-
Dimensions: 46.4mm (Length) × 24.8mm (Width) × 9.6mm (Height)
-
Input Power: 5S–12S LiPo Battery
-
Firmware Version: AM32_MAXKGO_F421
-
Firmware Upgrade: Supports online firmware updates via AM32.ca
-
Communication Protocols: Dshot300, Dshot600, Servo PWM
-
Signal Feedback: The TX telemetry port supports ESC data feedback, including voltage, temperature, and motor RPM (current sensing is not supported)
-
BEC: No BEC output
-
Cooling Fan: No built-in cooling fan
-
Water Resistance: Not waterproof; only resistant to light splashes
5-12S 80A ESC Features
-
MINI Size, MAX Power Output
Compact design with high-performance power output, providing an excellent balance between size and performance.
-
Multiple Protection Functions:
- Low Voltage Protection
- Over Temperature Protection
- Motor Stall Protection
- Low-Speed Protection
- Equipped with a high-performance ARM 32-bit Cortex-core MCU with a processing frequency of up to 120MHz.
- Designed with stall protection for RC cars and crawler vehicles to prevent damage caused by motor blockage.
- Provides propeller jam (stall) protection for multi-rotor drones, improving flight safety and ESC reliability.
- Supports firmware upgrades via:
- Betaflight Passthrough
- Single-wire UART
- Arduino
- Supports parameter configuration through the AM32.ca online configuration tool.
- Supports Servo PWM and Dshot300 / Dshot600 protocols.
- Supports EDT (Extended Dshot Telemetry), allowing full telemetry data transmission through the signal wire.
- Equipped with sine wave startup mode, providing smoother and more responsive startup performance for RC cars and crawler vehicles.
5-12S 80A ESC Applications
- Multi-rotor drones
- Fixed-wing model aircraft
- RC cars
- RC boats
Package Contents
Package 1
- 5-12S 80A ESC × 1
- Heat Shrink Tubes × 5
- Electrolytic Capacitor × 1 (63V 680μF)
- 2-Pin Dupont Cable × 1 (33cm)
Package 2
- 5-12S 80A ESC × 1
- Heat Shrink Tubes × 5
- Electrolytic Capacitor × 1 (63V 680μF)
- 2-Pin Dupont Cable × 1 (33cm)
- 3-Pin Dupont Cable × 1 (33cm)
- XT90 Male Connector × 1
- Black Power Wire × 1 (12AWG, 120mm)
- Red Power Wire × 1 (12AWG, 120mm)
