2670 Brushless ESC Product Description: (1) Adopting 32-bit high-performance processor STM32G071, with a working frequency of up to 64MHz and maximum support 128KHz motor PWM frequency.(2) PCB adopts 8-layer 3OZ immersion gold process, high-power MOS combined with metal heat sink, which can effectively dissipate heat under high current load and continue to work stably.(3) Supports multiple motion modes such as unidirectional, bidirectional, and braked motors.(4) Supports multiple protections such as low voltage protection, temperature protection, locked rotor protection, and current protection.(5) The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.(6)BEC supports adjustable outputs of 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, and 12V/3A, which can directly supply power to external devices such as receivers and servos, making the application of ESCs more extensive and flexible.(7) Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.(8) Onboard RGB LED color light settings, multiple LED colors can be customized.(9) Widely used in FPV racing drone,multi-axis drones, fixed-wing, model ships, climbing vehicles, model cars and other scenarios. Parameters of 2670 Brushless ESC: Model  2670 Processor STM32G071 Input voltage DC 7V-25.2V（2-6S Lipo） Continuous current (good heat dissipation) 70A Maximum current  (good heat dissipation) 110A Support firmware BLHeli_32，AM32 BLHeli_32 firmware SEQURE_G071_01 AM32 firmware SEQURE_G071 Signal protocol Dshot (All), PWM, Oneshot, Multishot, etc. Programming parameter adjustment Support Throttle calibration Support Timing angle setting Support Current detection Support Telemetry signal Support Motor steering settings Support RGB LED color lights Support BEC (if any) 5V/4A，6V/4A，7.2V/4A，8.2V/4A，12V/3A adjustable Application scenarios FPV racing drones, multi-axis drones, fixed-wing  UAV, model ships, climbing vehicles, model cars, etc.

Read more less

Super Value Bundles:  4 pcs 450V TO 12V DC-DC Step Down Module

Read more less

⚡ Electrical Specifications Frequency Range: 4.9-6.2 GHz Bandwidth: 1.3 GHz Impedance: 50 Ω VSWR: ≤ 1.5 Gain: 5 dBi Polarization: RHCP (Right-Hand Circular Polarization) Power Handling: 50 W Radiator Material: Copper Connector Type: SMA Operating Temperature: -40°C to +60°C Housing Material: Imported PC+ABS Dimensions & Weight: 155mm SMA (15g)

Read more less

Product Specifications Origin: Mainland China Brand: Beizheng Output Specs: 5V 3A Available Models: Beizheng 121 (Solder-Free / Plug-and-Play Version)

Read more less

This BMS board bundle includes 4-24S only charge BMS Board and BMS adapter.  

Read more less

ELRS 2.4G NANO Receiver Specifications Product Overview Origin: Mainland China Brand: ELRS Model: ELRS 2.4G NANO RX Type: Receiver Voltage: 5V Color: Black Technical Parameters Name: ExpressLRS Receiver Frequency: 2.4GHz Chipset: SX1281 + ESP8285 Antenna: T-type (Dipole) Output Power: 100mW Input Voltage: 3.6V - 5.5V Antenna Connector: IPEX1 Weight: 0.4g (Receiver only) Dimensions: 11mm x 18mm Firmware Version: 3.5.3 Channels: 16 Protocol: CRSF Package Contents 1 x Receiver 1 x T-type Antenna 2 x Heat Shrink Tubing 1 x 4P Connection Cable LED Status Indicators Double Flash: Binding Mode Slow Flash: No Transmitter Signal Solid On: Signal Connected Fast Flash: WiFi Update Mode Binding & Update Instructions Binding: Rapidly power the receiver on and off 3 times to enter Binding Mode. You have a 20-second window (indicated by the double flash) to complete the binding process. WiFi Update: After the binding window expires, the receiver will automatically enter WiFi Update Mode.

Read more less

Specifications: Model:  2299223-2 Power supply mode:  direct current Voltage:  381V-1000V Coil voltage:  12-24V Terminal pass voltage:  450-900V Long-term passing safety current:  500A Maximum current:  1000A Instantaneous current:  2000A Applicable object:  automotive relay Relay type:  electromagnetic relay   Typical application: DC high voltage high current applications Main contactors for hybrid,full battery electric vehicles and fuel-cell cars Battery charging system MKBMS Battery Management System       Package List: 1x    TE2299223-2 EVC500 Main Contactor 1X     HY2.0 single head 2P line  

Read more less

Wiring Terminal Set Specification Brand: MAXKGO Material: copper, stainless steel Net Weight: 62g Package Weight: 100g Package Dimensions: 12cm*8cm*8.5cm Applies to: BMS low voltage master board Model Inside Diameter Outer Diameter Width Front End Thickness Hole Diameter  T90-25/8 7.1 9.5 14.0 16.0 2.0 8.3 Size :  90 degree angle terminal block / unit(mm)    Features Adopt copper material and stainless steel material. Not easy to rust. Hard to bend. No pollution to the environment. Good taste for collocation for it's beautiful lustre. Outstanding capabilities in anti-corrosion and anti-rust even in the humid environment. Enjoy wide application since it's safe and easy to use.  Package Lists 90 degree angle terminal block T90-25/8       X 4  (copper) M8*16 stainless steel round head screw         X 2  (stainless steel) M8*Stainless steel nut        X 2   (stainless steel) M8 copper gasket        X 4   (copper) EVC 500 Main Contacto

Read more less

Specification: Model: Flipsky External UBEC 20S 20A  Main Battery Input Voltage: 4-20S Lipo Output Voltage: 5.0V (default) / 6.0V / 7.4V / 8.4V (4-10V adjustable by rotating calibration switch on the rear) Output Current: Continuous 20A (duration time depends on external heat dissipation conditions) Size: 60.4*47.15*28.2mm Weight: 114g Feature:  1.Metal shielding cover for good heat dissipation and reducing electromagnetic interference. 2.High efficiency DC-DC voltage regulator chip for transfer efficiency over 90%. 3.Sustained output current up to 20A (depends on external heat dissipation conditions). 4.Main power input available 4-20S Lipo. Adjustable output voltage (4-10V) compatible with different voltages. 5.Various protections like over-current protection, output short circuit protection, overheating protection and low voltage cutoff. Usage Guide: Wiring Diagram: If there is a built-in BEC in the brushless ESC, please disconnect the ESC's BEC output wires (e.g. “5V” and “GND” as shown below). Connect the signal wire “S” to the receiver's ‘S’ channel at the interface. Then, connect the UBEC's input wires in parallel with the battery pack. Plug the output terminals into the receiver's “+” and “-” channels. Voltage Output Adjustment: Adjustable output voltage (4-10V) in four levels through the calibration switch on the rear. The factory default voltage is 5.0V, shown as below: Front View: Rotating the potentiometer clockwise to reduce the output voltage; rotating it counterclockwise to increase the output voltage.

Read more less