Description
1. Smooth and Linear Power Output
Provides strong torque at low RPM, enabling smooth power delivery, responsive control, and reduced response delay.
2. Precision Dynamic Balancing
Features rotor dynamic balancing tested to ≤5 mg. Its optimized vibration-reduction design helps minimize motor vibration and reduce stress on bearings, contributing to longer bearing service life.
3. High-Efficiency Copper Windings
Built with high-efficiency copper windings, with a conversion efficiency of over 90% according to the product specifications. The design helps reduce energy loss and improve operating efficiency.
Technical Specifications
| Parameter |
Specification |
| Model |
4315 |
| KV Rating |
250KV |
| Stator Configuration |
12N14P |
| Rotor Dynamic Balancing |
≤5 mg |
| Operating Temperature |
-20°C to 90°C |
Recommended Applications
Package Contents
Single Motor Package
-
1 × 4315 250KV Brushless Motor
-
5 × M4×12 Countersunk Screws
-
5 × M4×14 Countersunk Screws
-
1 × M6 Nut
-
1 × M6 Washer
4-Motor Package
-
4 × 4315 250KV Brushless Motors
-
18 × M4×12 Hex Socket Countersunk Screws
-
18 × M4×14 Countersunk Screws
-
5 × M6 Nuts
-
5 × M6 Washers
Installation Notes
-
Select screws of the appropriate length for installation. Do not use screws that are too long, as they may reach the motor windings and cause a short circuit.
-
Check the mounting dimensions and screw compatibility before installation.
-
Operate the motor within its specified temperature range and application requirements.
Note: Motor performance and temperature may vary depending on the propeller, battery voltage, load, cooling conditions, and operating environment. Please refer to the detailed specification sheet for complete performance data.
