Flipsky FSESC 75450 84V High Current 450A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot Surfboard AGV Robot

Description

Specs:

  • Firmware: 5.2, supports firmware upgrade
  • Voltage: 14-84V (safe for 4-20S)
  • Continuous current: 50V/450A; 75V/350A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 1200A
  • BEC: 5V@1A
  • Support Modes: DC, BLDC, FOC (sinusoidal)
  • ERPM: 150000
  • Communication Ports: USB, CAN, UART, SPI, IIC
  • Supported Sensors: ABI, HALL, AS5047, AS5048A
  • Input Source Support: PPM, ADC, NRF, UART
  • Supported Sensorless: Yes
  • Regenerative capacity: Yes
  • Programmable via VESC_TOOL: Yes
  • Red Switch Button: Yes
  • Phase filter: Yes
  • Size:227.5*140*54mm(Including Water Cooling Enclosure)

Features:

  • Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
  • Support various control modes: Current / Duty cycle / Speed / PID control modes.
  • Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
  • CPU:STM32F405 with frequency 168MHz
  • Aluminum PCB with good heat dissipation to expand life span.
  • Built with ignite power on/off switch button.

Wiring Diagram:

Flipsky FSESC 75450 84V High Current 450A ESC Base On Vesc With Aluminum Case Water Cooling Enclosure For E-Foil Fighting Robot Surfboard AGV Robot

Product form

Specs: Firmware: 5.2, supports firmware upgrade Voltage: 14-84V (safe for 4-20S) Continuous current: 50V/450A; 75V/350A (Values depend on the mounting,... Read more

$280.00 Excl. VAT

            Description

            Specs:

            • Firmware: 5.2, supports firmware upgrade
            • Voltage: 14-84V (safe for 4-20S)
            • Continuous current: 50V/450A; 75V/350A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Burst: 1200A
            • BEC: 5V@1A
            • Support Modes: DC, BLDC, FOC (sinusoidal)
            • ERPM: 150000
            • Communication Ports: USB, CAN, UART, SPI, IIC
            • Supported Sensors: ABI, HALL, AS5047, AS5048A
            • Input Source Support: PPM, ADC, NRF, UART
            • Supported Sensorless: Yes
            • Regenerative capacity: Yes
            • Programmable via VESC_TOOL: Yes
            • Red Switch Button: Yes
            • Phase filter: Yes
            • Size:227.5*140*54mm(Including Water Cooling Enclosure)

            Features:

            • Adjustable protection against: low voltage protection, high voltage protection, over current protection, temperature abnormal protection, mosfets / motor over temperature protection.
            • Support various control modes: Current / Duty cycle / Speed / PID control modes.
            • Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
            • CPU:STM32F405 with frequency 168MHz
            • Aluminum PCB with good heat dissipation to expand life span.
            • Built with ignite power on/off switch button.

            Wiring Diagram:

            Recently viewed products

            Login

            Forgot your password?

            Don't have an account yet?
            Create account