Beschreibung
4IN1_8S70A_ESC
Description：
The 4IN1_8S70A_ESC is a high-performance brushless electronic speed controller that supports an input of 4-8S lithium batteries and has a continuous current rating of 70A. It is widely applicable to FPV racing drones, multi-rotor drones, etc.
4IN1_8S70A_ESC Parameters：
Type: Brushless Motor Electronic Speed Controller
Continuous Current: 70A
Instantaneous Current: 80A
Weight: Net Weight 13.1g
Size: 42.2 mm (L) × 43.8mm (W) × 7.4mm (H)
Input Power Supply: 4S-8S LiPo
Firmware Version: MAXKGO_4IN1_F421
Firmware Upgrade: Supports online upgrade via AM32.ca
Communication Protocol: Dshot 300, Dshot 600, Servo PWM
Signal Feedback: The TX wire/signal wire feeds back ESC voltage, current, temperature and motor speed
4IN1_8S70A_ESC Features：
MINI Size,MAX Power.
Supports multiple protection functions: Low-voltage protection, over-temperature protection, motor stall protection, low-speed protection
High-performance ARM 32-bit Cortex-core MCU with an operating frequency of 120 MHz
Stall protection for cars and crawlers
Stuck rotor protection for multi-rotors
Firmware upgradable via betaflight passthrough, or single wire serial or Arduino
web configurator at am32.ca
Servo PWM and Dshot300/600
EDT for full Dshot telemetry via signal wires
Sinusoidal startup mode for smoother starting on cars and crawlers
4IN1_8S70A_ESC Application Fields：
Multi-rotor Drone
Fixed-wing Model Aircraft
Mountings：
4IN1_8S70A_ESC *1
8pin Double-Ended Terminal Wire *1（25mm SH1.0）
Vibration Damping Ball *5（M3*8）
Solid Capacitor *1（35V 820μF）
XT60 Male Connector *1
Black Power Cable*1（12AWG，120mm）
Red Power Cable *1（12AWG，120mm）
Packaging Material
