Welcome to MAXKGO, we mainly sell MAXKGO BMS Board and our cooperative partner's Flipsky ESC. (10% Discount for some products)
Parcels be sent to US by Air or Register Mail support DDP.
Our Store support credit card payment( Visa, Mastercard, American Express, Discover)

Flipsky 84V 120A 75100 ESC Motor Controller High Power FOC BLDC Control Based On VESC For Electric Scooter

Beschreibung

Specs:

  • 75100 Size:L103mm*W58mm*H18.5mm+5.9mm USB TYPE
  • Voltage:14-84V (4-20S)
  • Current:100A Continuous,burst 120A
  • BEC:5V@1.5A
  • Phase filter: No
  • Support BLDC square wave mode control and FOC sine wave mode
  • Firmware: latest (firmware update supported)
  • ERPM:150000
  • Control Interface Ports:USB,CAN,UART
  • Supported Sensors:ABI，HALL，AS5047，AS5048A
  • Input Set Support:PPM，ADC，NRF,UART
  • Wire Size: 12AWG(75100)
  • Programmable: Yes
  • Regenerative Capacity: Yes

Product Details &Wire Conection:

With Outer Shell:

With Water Cooling:

Warm tips:
It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
Please be careful to limit the Absolute Maximum Current below 250A,setting page

New and old shells are shipped randomly

75100 With Water Cooling Enclosure Manual

Phase filering is not available for Flipsky ESC75100 and 75200!
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.

Flipsky 84V 120A 75100 ESC Motor Controller High Power FOC BLDC Control Based On VESC For Electric Scooter

Produkt Form

Specs: 75100 Size:L103mm*W58mm*H18.5mm+5.9mm USB TYPE Voltage:14-84V (4-20S) Current:100A Continuous,burst 120A BEC:5V@1.5A Phase filter: No Support BLDC square wave mode control... Lesen Sie mehr

$120.00 $86.00 Exkl. MwSt

    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Heute verschickt? Bestellung innerhalb: Aug 24, 2025 17:00:00 +0800

    Beschreibung

    Specs:

    • 75100 Size:L103mm*W58mm*H18.5mm+5.9mm USB TYPE
    • Voltage:14-84V (4-20S)
    • Current:100A Continuous,burst 120A
    • BEC:5V@1.5A
    • Phase filter: No
    • Support BLDC square wave mode control and FOC sine wave mode
    • Firmware: latest (firmware update supported)
    • ERPM:150000
    • Control Interface Ports:USB,CAN,UART
    • Supported Sensors:ABI，HALL，AS5047，AS5048A
    • Input Set Support:PPM，ADC，NRF,UART
    • Wire Size: 12AWG(75100)
    • Programmable: Yes
    • Regenerative Capacity: Yes

    Product Details &Wire Conection:

    With Outer Shell:

    With Water Cooling:

    Warm tips:
    It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
    Please be careful to limit the Absolute Maximum Current below 250A,setting page

    New and old shells are shipped randomly

    75100 With Water Cooling Enclosure Manual

    Phase filering is not available for Flipsky ESC75100 and 75200!
    Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
    Here below video and blog links FYI.

    Recently viewed products

    Anmeldung

    Haben Sie Ihr Passwort vergessen?

    Sie haben noch kein Konto?
    Konto erstellen