Beschreibung
Specifications :
Firmware: V1.5 and above (firmware update via Flipsky ESC Tool supported)
Voltage: 14V-85V (safe for 4S-20S)
Continuous current: 50V/400A; 75V/350A; 85V/300A (Values depend on the mounting, ambient
temperature and air/water circulation around the device.)
Peak Current: 800A
BEC: 5V@1A
Power/Motor Wires: Integrated M6 terminals
Programmable Tool: Flipsky ESC TOOL
PWM Frequency Control: YES
Multiple Speed Gear Limit Control: YES (UART / ADC)
Regenerative Capacity: YES
Communication Ports: USB, CAN, UART, PPM, ADC/PAS
Input Signals Support: PPM, ADC, PAS, UART(compatible with FLIPSKY remote such as VX1, VX1Pro,
VX2, VX3, VX3Pro, VX4Pro )
Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored), ENCODER
(ABI Encoder，AS5047 Absolute Type Encoder SPI Port), OPEN(Sensorless Open-Loop Startup)
Traction Control: YES
Multiple Speed Gear levels: Low, Medium, High, Reverse
Switch Support: Power on/off button switch or key switch
Size:L190*W109.1*H55.8(with aluminum enclosure)
Features:
1.Adopting ARM Cortex-M4 structure with the max 240MHz , improves PWM switching frequency and
the motor RPM.
2.Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages
and multiple control methods.
3.Programmable via Flipsky remote controller VX4Pro(remote firmware version: VX4Pro_V1.1 and above)
4.Supporting motor FOC with low working noise and smooth starting.
5.Supporting Real-time data and fault alerts.
6.Supporting adaptive variable PWM frequency control.
7.Supporting sensor mode(HALL,ENCODER) and sensorless mode(IPDS, HFPI,OPEN).
8.Supporting control types: Current, Duty Cycle, Speed Control, Position Control.
9.Supporting multiple types of motor temperature sensors such as NTC-10k-25℃, NTC-10K-100℃, PT1000,
PTC-1K-100℃, KTY, etc.
10.Protection functions: low and high voltage protection, motor over-temperature protection, MOSFET
over-temperature and over current protection, battery over discharge protection.
11.Integrating power of 12V(3pcs) to provide power for external devices(headlight, brake light, horn, etc.)
with two groups normally open and one controlled by brake signal. (Note: maximum output current:4A)
12.Supporting brake signal to cut off ESC output.
Wire Connection:
