Flipsky 4-12S 400A Dual BLDC Motor FSESC6.7 Pro Plus With Aluminum CASE Based on VESC6 Electric Skateboard Speed Controller

Beschreibung

Specs:

Firmware: Latest Version (support firmware upload)
Continuous current: single 100A, dual 200A; instantaneous
current: single 400A, dual 800A
Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
BEC: 5V@1.5A
ERPM: 150000
Control Interface Ports:USB,CAN,UART, SPI, IIC (for IMU)
Supported Sensors:ABI，HALL，AS5047，AS5048A
Input Set Support:PPM, ADC, NRF, UART
Modes: BLDC, FOC (sinusoidal)
Regenerative capacity: Yes
Programmable: Yes
Both sensored/ sensorless motor: Yes
Motor wire: 12AWG
Power cable:8AWG
Size: 81 x 77 x 20 mm(Including heatsink)

Feature:

Support four control modes: Current/Dutycycle/Speed /Position control mode.
Using 12pcs JMSL0601AG high current MOSETS.
Protection functions: low voltage protection, high voltage protection, over-current protection,
temperature abnormally protection, mosfets over-temperature protection.
Support the function of balancing car by connecting the IMU module through the IIC
interface; support inertial measurement unit modules such as MPU9250, MPU9150,
MPU6050,LSM6DS3, BMI160.

Wiring diagram:

Flipsky 4-12S 400A Dual BLDC Motor FSESC6.7 Pro Plus With Aluminum CASE Based on VESC6 Electric Skateboard Speed Controller

Produkt Form

Specs: Firmware: Latest Version (support firmware upload) Continuous current: single 100A, dual 200A; instantaneous current: single 400A, dual 800A Voltage:... Lesen Sie mehr

SKU: VC-67PD-S-100

$200.00 $178.00 Exkl. MwSt

    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Heute verschickt? Bestellung innerhalb: Nov 14, 2025 17:00:00 +0800

    Beschreibung

    Specs:

    Firmware: Latest Version (support firmware upload)
    Continuous current: single 100A, dual 200A; instantaneous
    current: single 400A, dual 800A
    Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
    BEC: 5V@1.5A
    ERPM: 150000
    Control Interface Ports:USB,CAN,UART, SPI, IIC (for IMU)
    Supported Sensors:ABI，HALL，AS5047，AS5048A
    Input Set Support:PPM, ADC, NRF, UART
    Modes: BLDC, FOC (sinusoidal)
    Regenerative capacity: Yes
    Programmable: Yes
    Both sensored/ sensorless motor: Yes
    Motor wire: 12AWG
    Power cable:8AWG
    Size: 81 x 77 x 20 mm(Including heatsink)

    Feature:

    Support four control modes: Current/Dutycycle/Speed /Position control mode.
    Using 12pcs JMSL0601AG high current MOSETS.
    Protection functions: low voltage protection, high voltage protection, over-current protection,
    temperature abnormally protection, mosfets over-temperature protection.
    Support the function of balancing car by connecting the IMU module through the IIC
    interface; support inertial measurement unit modules such as MPU9250, MPU9150,
    MPU6050,LSM6DS3, BMI160.

    Wiring diagram:

    Recently viewed products

    Anmeldung

    Haben Sie Ihr Passwort vergessen?

    Sie haben noch kein Konto?
    Konto erstellen