2670 Brushless ESC Product Description: (1) Adopting 32-bit high-performance processor STM32G071, with a working frequency of up to 64MHz and maximum support 128KHz motor PWM frequency.(2) PCB adopts 8-layer 3OZ immersion gold process, high-power MOS combined with metal heat sink, which can effectively dissipate heat under high current load and continue to work stably.(3) Supports multiple motion modes such as unidirectional, bidirectional, and braked motors.(4) Supports multiple protections such as low voltage protection, temperature protection, locked rotor protection, and current protection.(5) The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.(6)BEC supports adjustable outputs of 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, and 12V/3A, which can directly supply power to external devices such as receivers and servos, making the application of ESCs more extensive and flexible.(7) Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.(8) Onboard RGB LED color light settings, multiple LED colors can be customized.(9) Widely used in FPV racing drone,multi-axis drones, fixed-wing, model ships, climbing vehicles, model cars and other scenarios. Parameters of 2670 Brushless ESC: Model  2670 Processor STM32G071 Input voltage DC 7V-25.2V（2-6S Lipo） Continuous current (good heat dissipation) 70A Maximum current  (good heat dissipation) 110A Support firmware BLHeli_32，AM32 BLHeli_32 firmware SEQURE_G071_01 AM32 firmware SEQURE_G071 Signal protocol Dshot (All), PWM, Oneshot, Multishot, etc. Programming parameter adjustment Support Throttle calibration Support Timing angle setting Support Current detection Support Telemetry signal Support Motor steering settings Support RGB LED color lights Support BEC (if any) 5V/4A，6V/4A，7.2V/4A，8.2V/4A，12V/3A adjustable Application scenarios FPV racing drones, multi-axis drones, fixed-wing  UAV, model ships, climbing vehicles, model cars, etc.

Lesen Sie Mehr Weniger

Super Value Bundles:  4 pcs 450V TO 12V DC-DC Step Down Module

Lesen Sie Mehr Weniger

⚡ Electrical Specifications Frequency Range: 4.9-6.2 GHz Bandwidth: 1.3 GHz Impedance: 50 Ω VSWR: ≤ 1.5 Gain: 5 dBi Polarization: RHCP (Right-Hand Circular Polarization) Power Handling: 50 W Radiator Material: Copper Connector Type: SMA Operating Temperature: -40°C to +60°C Housing Material: Imported PC+ABS Dimensions & Weight: 155mm SMA (15g)

Lesen Sie Mehr Weniger

Product Specifications Origin: Mainland China Brand: Beizheng Output Specs: 5V 3A Available Models: Beizheng 121 (Solder-Free / Plug-and-Play Version)

Lesen Sie Mehr Weniger

This BMS board bundle includes 4-24S only charge BMS Board and BMS adapter.  

Lesen Sie Mehr Weniger

ELRS 2.4G NANO Receiver Specifications Product Overview Origin: Mainland China Brand: ELRS Model: ELRS 2.4G NANO RX Type: Receiver Voltage: 5V Color: Black Technical Parameters Name: ExpressLRS Receiver Frequency: 2.4GHz Chipset: SX1281 + ESP8285 Antenna: T-type (Dipole) Output Power: 100mW Input Voltage: 3.6V - 5.5V Antenna Connector: IPEX1 Weight: 0.4g (Receiver only) Dimensions: 11mm x 18mm Firmware Version: 3.5.3 Channels: 16 Protocol: CRSF Package Contents 1 x Receiver 1 x T-type Antenna 2 x Heat Shrink Tubing 1 x 4P Connection Cable LED Status Indicators Double Flash: Binding Mode Slow Flash: No Transmitter Signal Solid On: Signal Connected Fast Flash: WiFi Update Mode Binding & Update Instructions Binding: Rapidly power the receiver on and off 3 times to enter Binding Mode. You have a 20-second window (indicated by the double flash) to complete the binding process. WiFi Update: After the binding window expires, the receiver will automatically enter WiFi Update Mode.

Lesen Sie Mehr Weniger

Spezifikationen: Marke: TE Modell: 2299223-2 Stromversorgungsmodus: Gleichstrom Spannung: 381V-1000V Spulenspannung: 12-24V Anschlussdurchgangsspannung: 450-900 V Dauerhafter Sicherheitsstrom: 500A Maximaler Strom: 1000A Momentanstrom: 2000A Anwendbares Objekt: Automobilrelais Relaistyp: elektromagnetisches Relais Typische Anwendung: DC-Hochspannungs-Hochstromanwendungen Hauptschütze für Hybrid- und vollbatteriebetriebene Elektrofahrzeuge sowie Brennstoffzellenfahrzeuge Batterieladesystem MKBMS Batteriemanagementsystem Paketliste: 1x TE2299223-2 EVC500 Hauptschütz 1X HY2.0 Einzelkopf 2P-Leitung

Lesen Sie Mehr Weniger

Verdrahtungsklemmensatz Spezifikation Marke: MAXKGO Material: Kupfer, Edelstahl Nettogewicht: 62g Paketgewicht: 100g Verpackungsabmessungen: 12 cm x 8 cm x 8,5 cm Gilt für: BMS Niederspannungs-Masterboard Modell Innendurchmesser Außendurchmesser Breite Frontend Dicke Lochdurchmesser T90-25/8 7.1 9,5 14,0 16,0 2.0 8.3 Größe: 90-Grad-Winkelklemmenblock/Einheit (mm) Merkmale Verwenden Sie Kupfer- und Edelstahlmaterial. Rostet nicht so leicht. Schwer zu biegen. Keine Umweltverschmutzung. Guter Geschmack für die Zusammenstellung aufgrund des schönen Glanzes. Hervorragende Korrosions- und Rostschutzeigenschaften, auch in feuchter Umgebung. Freuen Sie sich über die breite Anwendung, da es sicher und einfach zu verwenden ist. Paketlisten 90 Grad Winkelklemmenblock T90-25/8 X 4 (Kupfer) M8*16 Edelstahl-Rundkopfschraube x 2 (Edelstahl) M8*Edelstahlmutter x 2 (Edelstahl) M8 Kupferdichtung x 4 (Kupfer) EVC 500 Hauptkontakt

Lesen Sie Mehr Weniger

Specification: Model: Flipsky External UBEC 20S 20A  Main Battery Input Voltage: 4-20S Lipo Output Voltage: 5.0V (default) / 6.0V / 7.4V / 8.4V (4-10V adjustable by rotating calibration switch on the rear) Output Current: Continuous 20A (duration time depends on external heat dissipation conditions) Size: 60.4*47.15*28.2mm Weight: 114g Feature:  1.Metal shielding cover for good heat dissipation and reducing electromagnetic interference. 2.High efficiency DC-DC voltage regulator chip for transfer efficiency over 90%. 3.Sustained output current up to 20A (depends on external heat dissipation conditions). 4.Main power input available 4-20S Lipo. Adjustable output voltage (4-10V) compatible with different voltages. 5.Various protections like over-current protection, output short circuit protection, overheating protection and low voltage cutoff. Usage Guide: Wiring Diagram: If there is a built-in BEC in the brushless ESC, please disconnect the ESC's BEC output wires (e.g. “5V” and “GND” as shown below). Connect the signal wire “S” to the receiver's ‘S’ channel at the interface. Then, connect the UBEC's input wires in parallel with the battery pack. Plug the output terminals into the receiver's “+” and “-” channels. Voltage Output Adjustment: Adjustable output voltage (4-10V) in four levels through the calibration switch on the rear. The factory default voltage is 5.0V, shown as below: Front View: Rotating the potentiometer clockwise to reduce the output voltage; rotating it counterclockwise to increase the output voltage.

Lesen Sie Mehr Weniger