Spec:Firmware supporting update via Flipsky ESC ToolVoltage: 14-84V(safe for 4-20S)Continuous current: 50V/60A; 75V/50A; 84V/40A (Values depend on the mounting, ambient temperature and air/water circulation around the device!); Peak Current: 250ACommunication Ports: USB, CAN, UARTInput Signal Support: PPM, UART(compatible with FLIPSKY remote VX4 only), ADCBEC: 5V@1AMultiple Speed Gear levels: Low, Medium, High, ReverseMotor/power wire size: 12 AWGProgrammable: YesRegenerative Capacity: YesSize: L110.5*W55*H30mm(Including Alu. Case)Power Switch Button: Red Features:1.Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed2.240MHz and the max PWM switching frequency 45KHz, which improves the motor RPM.3.Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different batteryvoltages and many control ways.4.Programmable via Flipsky VX4 remote(Firmware Version:VX4_V1.2)5.Supporting FOC with low working noise and smooth starting.6.Supporting Real-time data and fault alerts.7.Supporting adaptive variable PWM frequency control.8.Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI).9.Supporting control types: Current, Duty Cycle10.Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection. Application Fields:Electric skateboard / Ebike / E-Scooter / Electric Motorc ycle / Robotics / FPV / RC Toys /Boat / Kayak etc Note: USB cable will be shipped randomly in black or white color.

Lesen Sie Mehr Weniger

Specifications: Firmware: V1.4 or above (firmware update via Flipsky ESC Tool supported) Voltage: 14V-60V (safe for 4S-12S) Continuous Current: 60A / Single; 120A / Dual (Values depend on the mounting and ambient temperature around the device) Peak Current: 150A / Single; 300A / Dual Communication Ports: USB, CAN, UART, PPM, ADC Input Signals Support: PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only at present), PAS Startup Modes Support: IPDS (sensorless), HFPI (sensorless), HALL (sensored), Encoder (ABI, AS5047 encoder SPI interface) BEC: 5V@1A Multiple Speed Gear Levels: Low, Medium, High, Reverse Front Lights, Rear Brake Lights & Horn: Support Programmable: Yes Regenerative Capacity: Yes Slide Poweron & Auto shutdown: Yes. Auto poweroff time can be customized. Self-resetting switch with green LED button Diameter: 16mm Power Wire Size: 12AWG; Motor Wire Size: 12 AWG Size: L85*W70*H25mm (including heatsink) Features: 1.Adopting CPU AT32F403ARCT7 with the structure of ARM Cortex-M4 allows CPU clock speed. 2.240MHz and the max PWM switching frequency 25KHz improves the motor RPM. Programmable via Flipsky ESC Tool to be compatible with multi-types of motor, different battery voltages and many control ways. 3.Programmable via Flipsky remote controller VX4 (remote firmware version: VX4_V1.4.0 or above). 4.Supporting motor FOC with low working noise and smooth starting. 5.Supporting Real-time data and fault alerts. 6.Supporting adaptive variable PWM frequency control. 7.Supporting sensor mode(HALL) and sensorless mode(IPDS, HFPI). 8.Supporting control types: Current, Duty Cycle, Speed control, Position Control. 9.Protection functions: low and high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature and over current protection, battery over discharge protecting, motor over-temperature protection. 10.Integrated smart switch function: supports sliding poweron and automatic shutdown function; automatic shutdown time is adjustable via Flipsky ESC Tool. 11.Supporting extra interface like front lights, brake lights and horn fixtures (12V 4A). 12.Supporting multiple typed of motor t emperature sensors such as NTC-10K-25℃, NTC-10K-100℃, PT1000, PTC-1K-100℃, KTY and so on. ​Wire Connection:

Lesen Sie Mehr Weniger

Specification: Firmware: V1.6 and above (firmware update via Flipsky ESC Tool supported) Voltage: 14V-85V (safe for 4-20S) Continuous Current:85V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device.) Peak Current: 250A BEC: 5V@1A Power Wire: 8 AWG (1200mm) Motor Wire: 8 AWG (195mm) Programmable Tool: Flipsky ESC TOOL PWM Frequency Control: YES Multiple Speed Gear Limit Control: YES (UART） Regenerative Capacity: YES Communication Ports: USB，CAN，UART，PPM，ADC Control Signals Support: PPM，ADC，UART (compatible with all FLIPSKY VX Series remotes) Size: L93.8mm*W63mm*H26mm (with aluminum enclosure) Feature: 1.Fully sealed with lP68 water-proof rate. 2.Adopting ARM Cortex-M4 structure with the max 240MHZ,improves PWM switching frequency and the motor RPM. 3.Programmable via Flipsky ESC Tool to be compatible with multi-types of motors, different battery voltages and multiple control methods. 4.Programmable via Flipsky remote controller VX4Pro(remote firmware version: VX4Pro_V1.2 and above). 5.Supporting motor FOC with low working noise and smooth starting. 6.Supporting save / load configuration files via ESC Tool. 7.Supporting adaptive variable PWM frequency control. 8.Supporting real-time data and fault alerts. 9.Supporting multiple speed levels: Level 1 (Low), Level 2 (Medium), Level 3 (High). 10.Supporting Sensorless Mode: IPDS, HFPI, OPEN. 11.Startup Modes Support: IPDS (sensorless), HFPI (sensorless), OPEN (Sensorless Open-Loop Startup). 12.Traction Control: YES. 13.Supporting control types: Current, Duty Cycle, Speed Control. 14.Supporting emergency stop and shutdown. 15.Support safe power-on protection (in PPM&ADC control modes only). 16.Protection functions: low and high voltage protection, MOSFET over-temperature and over current protection, battery overcharge and discharge protection. Wire Connection:

Lesen Sie Mehr Weniger

Specs： Hardware:V4.20Firmware:Latest VersionCurrent:50A continuous/single, 100A continuous/dual , Instantaneous current 150A per single, total 300A for system instantaneous current.Voltage: 8V-60V (Cells: 3-13S LiPo,Safe for 3S to 12S LiPo，Voltage spikes may not exceed 60V! )ERPM:60000BEC: 5V@1.5ABEC type: Internal driver support Modes: DC, BLDC, FOC (sinusoidal)Timing: Software calibration Cutoff Voltage: ProgrammableFrequency: PWM input Governor: NoProgramming card: NoReverse: YesMotor wire: 12AWG Power cable: 12AWG Package Contents:  1*Dual FSESC4.20 + Heatsink2*VESC Sensor Wires1*Micro USB 1*Manual Wire Connection:

Lesen Sie Mehr Weniger

Product DescriptionMAXKGO 5-16S 480A High Current Power Distribution Board The MAXKGO 5-16S 480A Power Distribution Board (PDB) is a high-performance power distribution solution designed for high-power FPV racing drones, multirotor drones, and large UAV platforms. Supporting 5S to 16S LiPo battery input and delivering up to 480A total continuous current (120A × 4 channels), this PDB provides stable and efficient power distribution for demanding drone applications. Designed with a lightweight structure and high-current capability, it features a 6-layer PCB with 3oz copper layers, ensuring excellent current handling performance and improved reliability during high-load operation. The board integrates dual BEC outputs (5V and 12V), allowing direct power supply for flight controllers, cameras, receivers, and other onboard electronics. Key Features Ultra High Current Capability Supports 5S-16S LiPo battery input Total continuous current: 480A 4-channel output design: 120A continuous current per channel 130A peak current per channel Dual BEC Power Output Built-in dual voltage BEC outputs: 5V / 3A output 12V / 3A output Suitable for powering: Flight controllers FPV cameras Video transmitters Other onboard electronics High-Performance PCB Design 6-layer PCB structure 3oz copper layers for excellent current capacity Lightweight design with only 17.7g net weight Compact size for easy installation Multiple ESC Support Supports up to 8 ESC connections, making it suitable for larger multirotor platforms. Technical Specifications Item Specification Product Type High Current Power Distribution Board Battery Input 5S-16S LiPo Input Voltage Range 15V-68V Continuous Current 480A Total (120A × 4) Peak Current 130A per channel BEC Output 1 5V / 3A BEC Output 2 12V / 3A ESC Support Up to 8 ESCs PCB Structure 6-layer PCB Copper Thickness 3oz Efficiency ≤95% Static Power Consumption 1mA Current Sensor Ratio 50 Communication Port 8-pin SH1.0 connector Mounting Hole Pattern 30.5 × 30.5mm Mounting Hole Diameter 4mm (M4) Dimensions 55 × 55 × 6.55mm Weight 17.7g Operating Temperature -20℃ to 100℃ Recommended Drone Size 8-16 inch Applications The MAXKGO 5-16S 480A PDB is ideal for: FPV Racing Drones Long-range FPV Drones Heavy-lift Multirotors Industrial UAV Platforms High-power Drone Builds Package Includes MAXKGO 5-16S 480A Power Distribution Board ×1 8-pin Dual Connector Cable ×1 Anti-vibration Rubber Balls ×5 M3 Nuts ×5 Power Cable (8AWG 120mm) ×1 XT90 Male Connector ×1 Capacitor 80V 560μF ×1 Heat Shrink Tubes ×2

Lesen Sie Mehr Weniger