Specification: Firmware: V1.6 and above (firmware update via Flipsky ESC Tool supported) Voltage: 14V-85V (safe for 4-20S) Continuous Current:85V/150A (Values depend on the mounting, ambient temperature and air/water circulation around the device.) Peak Current: 250A BEC: 5V@1A Power Wire: 8 AWG (1200mm) Motor Wire: 8 AWG (195mm) Programmable Tool: Flipsky ESC TOOL PWM Frequency Control: YES Multiple Speed Gear Limit Control: YES (UART） Regenerative Capacity: YES Communication Ports: USB，CAN，UART，PPM，ADC Control Signals Support: PPM，ADC，UART (compatible with all FLIPSKY VX Series remotes) Size: L93.8mm*W63mm*H26mm (with aluminum enclosure) Feature: 1.Fully sealed with lP68 water-proof rate. 2.Adopting ARM Cortex-M4 structure with the max 240MHZ,improves PWM switching frequency and the motor RPM. 3.Programmable via Flipsky ESC Tool to be compatible with multi-types of motors, different battery voltages and multiple control methods. 4.Programmable via Flipsky remote controller VX4Pro(remote firmware version: VX4Pro_V1.2 and above). 5.Supporting motor FOC with low working noise and smooth starting. 6.Supporting save / load configuration files via ESC Tool. 7.Supporting adaptive variable PWM frequency control. 8.Supporting real-time data and fault alerts. 9.Supporting multiple speed levels: Level 1 (Low), Level 2 (Medium), Level 3 (High). 10.Supporting Sensorless Mode: IPDS, HFPI, OPEN. 11.Startup Modes Support: IPDS (sensorless), HFPI (sensorless), OPEN (Sensorless Open-Loop Startup). 12.Traction Control: YES. 13.Supporting control types: Current, Duty Cycle, Speed Control. 14.Supporting emergency stop and shutdown. 15.Support safe power-on protection (in PPM&ADC control modes only). 16.Protection functions: low and high voltage protection, MOSFET over-temperature and over current protection, battery overcharge and discharge protection. Wire Connection:

Lesen Sie Mehr Weniger

Specs： Hardware:V4.20Firmware:Latest VersionCurrent:50A continuous/single, 100A continuous/dual , Instantaneous current 150A per single, total 300A for system instantaneous current.Voltage: 8V-60V (Cells: 3-13S LiPo,Safe for 3S to 12S LiPo，Voltage spikes may not exceed 60V! )ERPM:60000BEC: 5V@1.5ABEC type: Internal driver support Modes: DC, BLDC, FOC (sinusoidal)Timing: Software calibration Cutoff Voltage: ProgrammableFrequency: PWM input Governor: NoProgramming card: NoReverse: YesMotor wire: 12AWG Power cable: 12AWG Package Contents:  1*Dual FSESC4.20 + Heatsink2*VESC Sensor Wires1*Micro USB 1*Manual Wire Connection:

Lesen Sie Mehr Weniger