Discover the Ultimate Waterproof ESC: MAXKGO MINI V6.8!
, by COMPANYMAXKGO, 1 min reading time
Are you ready to dive into the wacky world of electronic speed controllers? Buckle up, because we're about to take a wild ride through the specifications of the Firmware 5.2 ESC. Get ready for a rollercoaster of tech talk and quirky details!
What's the Deal with the Firmware 5.2?
Let's start with the basics. The Firmware 5.2 ESC is not your average electronic speed controller. With firmware supporting upgrades, this bad boy is always ready to level up and keep you on the cutting edge of technology. It's like having a personal trainer for your electric ride!
Can You Handle the Current?
Hold on tight, because we're talking serious power here. With a continuous current of 150A and an instantaneous current of 200A, this ESC means business. Just remember, those values depend on the mounting and ambient temperature around the device. So, keep your cool and ride on!
Voltage: The Shocking Truth
The voltage range of 14V-60V might seem electrifying, but don't worry, it's safe for 4S to 12S setups. Just watch out for voltage spikes that may not exceed 60V. Safety first, folks!
What's the BEC and ERPM All About?
Get ready for some acronym overload! The BEC delivers 5V@1.5A, while the ERPM hits a whopping 150,000. It's like a high-speed chase in the world of electronics. Hang on tight!
Modes, Ports, and Wires, Oh My!
Supported modes include BLDC and FOC (sinusoidal), while the control interface ports feature USB UART. Input set support covers PPM, ADC, NRF, and UART. And let's not forget about the power wire (8AWG 1200mm) and motor wire (8AWG 170mm). It's a wired world out there!
Features that Make You Go Wow!
But wait, there's more! The Firmware 5.2 ESC is fully sealed with an IP68 waterproof rating, so you can splash through puddles without a care. Based on vesc6, programmable via VESC_TOOL, and supporting real-time data, this ESC is the real deal. It's like having a superhero for your electric ride!