Welcome to MAXKGO, we mainly sell MAXKGO BMS Board and our cooperative partner's Flipsky ESC.
Parcels be sent to US by Air or Register Mail support DDP.
If you need to use credit card payment, please move to our aliexpress store: https://www.aliexpress.com/store/1104128421?spm= or Alibaba store: Products list direct from CN (alibaba.com)

Flipsky 4-12S 400A Dual BLDC Motor FSESC6.7 Pro Plus With Aluminum CASE Based on VESC6 Electric Skateboard Speed Controller

Description

Specs:

Firmware: Latest Version (support firmware upload)
Continuous current: single 100A, dual 200A; instantaneous
current: single 400A, dual 800A
Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
BEC: 5V@1.5A
ERPM: 150000
Control Interface Ports:USB,CAN,UART, SPI, IIC (for IMU)
Supported Sensors:ABI，HALL，AS5047，AS5048A
Input Set Support:PPM, ADC, NRF, UART
Modes: BLDC, FOC (sinusoidal)
Regenerative capacity: Yes
Programmable: Yes
Both sensored/ sensorless motor: Yes
Motor wire: 12AWG
Power cable:8AWG
Size: 81 x 77 x 20 mm(Including heatsink)

Feature:

Support four control modes: Current/Dutycycle/Speed /Position control mode.
Using 12pcs JMSL0601AG high current MOSETS.
Protection functions: low voltage protection, high voltage protection, over-current protection,
temperature abnormally protection, mosfets over-temperature protection.
Support the function of balancing car by connecting the IMU module through the IIC
interface; support inertial measurement unit modules such as MPU9250, MPU9150,
MPU6050,LSM6DS3, BMI160.

Wiring diagram:

Flipsky 4-12S 400A Dual BLDC Motor FSESC6.7 Pro Plus With Aluminum CASE Based on VESC6 Electric Skateboard Speed Controller

Product form

Specs: Firmware: Latest Version (support firmware upload) Continuous current: single 100A, dual 200A; instantaneous current: single 400A, dual 800A Voltage:... Read more

SKU: VC-67PD-S-100

$320.00 $209.00 Excl. VAT

    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Tell a unique detail about this product

      Description

      Specs:

      Firmware: Latest Version (support firmware upload)
      Continuous current: single 100A, dual 200A; instantaneous
      current: single 400A, dual 800A
      Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
      BEC: 5V@1.5A
      ERPM: 150000
      Control Interface Ports:USB,CAN,UART, SPI, IIC (for IMU)
      Supported Sensors:ABI，HALL，AS5047，AS5048A
      Input Set Support:PPM, ADC, NRF, UART
      Modes: BLDC, FOC (sinusoidal)
      Regenerative capacity: Yes
      Programmable: Yes
      Both sensored/ sensorless motor: Yes
      Motor wire: 12AWG
      Power cable:8AWG
      Size: 81 x 77 x 20 mm(Including heatsink)

      Feature:

      Support four control modes: Current/Dutycycle/Speed /Position control mode.
      Using 12pcs JMSL0601AG high current MOSETS.
      Protection functions: low voltage protection, high voltage protection, over-current protection,
      temperature abnormally protection, mosfets over-temperature protection.
      Support the function of balancing car by connecting the IMU module through the IIC
      interface; support inertial measurement unit modules such as MPU9250, MPU9150,
      MPU6050,LSM6DS3, BMI160.

      Wiring diagram:

      Recently viewed products

      Login

      Forgot your password?

      Don't have an account yet?
      Create account