Welcome to MAXKGO, we mainly sell MAXKGO BMS Board and our cooperative partner's Flipsky ESC.
Parcels be sent to US by Air or Register Mail support DDP.
If you need to use credit card payment, please move to our aliexpress store: https://www.aliexpress.com/store/1104128421?spm= or Alibaba store: Products list direct from CN (alibaba.com)

FLIPSKY Dual Mini FSESC6.7 Pro 140A base on VESC6.6 With Aluminum Anodized Heat Sink

Beschreibung

Specs:

Firmware: Latest Version
Continuous current: single 70A, dual 140A; instantaneous current: single 200A, dual 400A
Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
BEC: 5V@1A
ERPM: 150000
Control Interface Ports:USB,CAN,UART
Supported Sensors:ABI，HALL，AS5047，AS5048A
Input Set Support:PPM, ADC, NRF, UART, SPI, IIC (for IMU)
Modes:DC, BLDC, FOC (sinusoidal)
Regenerative capacity: Yes
Programmable: Yes
Motor wire: 12AWG
Power cable:14AWG (with XT90 connector)
Size: 79.8 x 66.8 x 17.8 mm(Including heatsink)

Feature:

Support four control modes: Current/Dutycycle/Speed /Position control mode.
Protection functions: low voltage protection, high voltage protection,
over-current protection, temperature abnormally protection, mosfets
over-temperature protection.
Support the function of balancing car by connecting the IMU module through
the IIC interface; support inertial measurement unit modules such as MPU9250,
MPU9150, MPU6050, LSM6DS3, BMI160.

Wiring diagram:

FLIPSKY Dual Mini FSESC6.7 Pro 140A base on VESC6.6 With Aluminum Anodized Heat Sink

Produkt Form

Specs: Firmware: Latest Version Continuous current: single 70A, dual 140A; instantaneous current: single 200A, dual 400A Voltage: 14V-60V(Cells: 4-13S; safe... Lesen Sie mehr

SKU: VH-M67PD-N-070

$268.00 $148.00 Exkl. MwSt

    • Tell a unique detail about this product
    • Tell a unique detail about this product
    • Tell a unique detail about this product

      Beschreibung

      Specs:

      Firmware: Latest Version
      Continuous current: single 70A, dual 140A; instantaneous current: single 200A, dual 400A
      Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! )
      BEC: 5V@1A
      ERPM: 150000
      Control Interface Ports:USB,CAN,UART
      Supported Sensors:ABI，HALL，AS5047，AS5048A
      Input Set Support:PPM, ADC, NRF, UART, SPI, IIC (for IMU)
      Modes:DC, BLDC, FOC (sinusoidal)
      Regenerative capacity: Yes
      Programmable: Yes
      Motor wire: 12AWG
      Power cable:14AWG (with XT90 connector)
      Size: 79.8 x 66.8 x 17.8 mm(Including heatsink)

      Feature:

      Support four control modes: Current/Dutycycle/Speed /Position control mode.
      Protection functions: low voltage protection, high voltage protection,
      over-current protection, temperature abnormally protection, mosfets
      over-temperature protection.
      Support the function of balancing car by connecting the IMU module through
      the IIC interface; support inertial measurement unit modules such as MPU9250,
      MPU9150, MPU6050, LSM6DS3, BMI160.

      Wiring diagram:

      Recently viewed products

      Anmeldung

      Haben Sie Ihr Passwort vergessen?

      Sie haben noch kein Konto?
      Konto erstellen